Qcells Q.SAVE-G3 6.0 kWh
Official manufacturer EU перевірено 22 вересня 2026 р.
Identity
| category | batteries |
| ean | — |
| firmware | {'documented_version': 'UNKNOWN', 'constraints': 'UNKNOWN'} |
| generation | G3 |
| manufacturer | Qcells |
| market_version | EU |
| model | Q.SAVE-G3 6.0 kWh |
| mpn | — |
| product_family | Q.SAVE |
| product_status | active |
| region | EU |
| release_year | — |
| series | Q.SAVE-G3 |
| sku | — |
Electrical
| battery_capacity_range_kwh | — |
| battery_communication | — |
| battery_max_charge_current_a | — |
| battery_max_charge_power_w | — |
| battery_max_discharge_current_a | — |
| battery_max_discharge_power_w | — |
| battery_nominal_battery_voltage_v | — |
| battery_type | — |
| battery_voltage_range_v | — |
| bms | Q.SAVE BMS-G3 |
| cell_chemistry | LFP (LiFePO4) |
| cell_configuration | — |
| communication | RS485 / CAN 2.0 (BMS / Inverter / Battery module) |
| depth_of_discharge_pct | 90 |
| eps_peak_power | — |
| eps_phase | — |
| eps_rated_power_va | — |
| eps_switchover_time_ms | — |
| eps_voltage | — |
| expandable_to_kwh | — |
| external_transfer_switch_required | — |
| max_charge_current_a | 30 |
| max_charge_power_w | 6100.0 |
| max_discharge_current_a | 30 |
| max_discharge_power_w | 6100.0 |
| modules_per_stack | 1x Q.SAVE BMS-G3, 2x Q.SAVE BAT-G3 |
| nominal_energy_kwh | 6.1 |
| nominal_voltage_v | 204.8 |
| parallel_capability | — |
| parallel_units_max | — |
| peak_discharge | — |
| round_trip_efficiency_pct | 95 |
| usable_energy_kwh | 5.5 |
| voltage_range_v | 180 - 232 |
Physical / mechanical
| ac_terminal | — |
| cooling | Natural convection |
| dc_connector | — |
| depth_mm | — |
| dimensions_mm | — |
| display | — |
| enclosure_material | — |
| height_mm | — |
| mounting | — |
| noise_db | — |
| weight_kg | — |
| width_mm | — |
Installation
| cable_requirements | — |
| commissioning | — |
| installation_angle | — |
| mounting_clearances | — |
| torque | — |
Environment
| ingress_protection | IP65 |
| max_altitude_m | 3000 |
| operating_temperature_c | -30 to 50 |
| overvoltage_category | II (DC) |
| pollution_degree | — |
| protective_class | Class I |
| relative_humidity_pct | 0 - 100 (non-condensing) |
| storage_temperature_c | 0 to 40 (1 year) |
Interfaces & connectors
| app | — |
| communication | ['RS485', 'CAN 2.0'] |
| dry_contact | — |
| meter_interface | — |
| monitoring_portal | — |
| protocols | [] |
Protection
| anti_islanding | — |
| arc_fault | — |
| dc_switch | System switch (ON / OFF): power button, DC-Breaker |
| insulation_monitoring | — |
| overvoltage_category | — |
| rcmu | — |
| reverse_polarity | Reverse connect protection: Yes |
| surge_protection_ac | — |
| surge_protection_dc | — |
Certifications
| standards | ['VDE 2510-50', 'EN 62619', 'EN 61000-6-1', 'EN 61000-6-2', 'EN 61000-6-3', 'EN 61000-6-4', 'EN 61000-3-2', 'UN38.3'] |
Warranty & service
| conditions | Cycle life 6000 cycles @ 90 % DOD (printed in the battery specification table) |
| extension_options | — |
| standard_years | 10 |
Документи
Додаткові задокументовані параметри
Записано дослівно з джерела; поля схеми для них поки немає.
| Faradic charge efficiency [%] | 99 |
| Q.SAVE-G3 datasheet, power row (uncertain) | 6.1 kW |
| Rated charge / discharge current [A] | 25 |
| Rated charge / discharge power [kW] | 5.1 |
| UN number / hazard class | UN 3480 / Class 9 |
| battery.communication | UNKNOWN |
| battery.max_charge_current_a | UNKNOWN |
| battery.max_charge_power_w | UNKNOWN |
| battery.max_discharge_current_a | UNKNOWN |
| battery.max_discharge_power_w | UNKNOWN |
| battery.nominal_battery_voltage_v | UNKNOWN |