База знань › Battery Control Units
Dyness STACK100 BDU & Base
Verified distributor GLOBAL перевірено 22 вересня 2026 р.
Identity
| category | battery_control_units |
| description | Control head and base for the STACK100 high-voltage stacked battery system, managing 3-15 STACK100 modules per tower. |
| ean | — |
| generation | — |
| gtin | — |
| launch_year | — |
| manufacturer | Dyness |
| marketing_name | Dyness Stack100 BDU & Base |
| model | STACK100 BDU & Base |
| part_number | SBDU100 (Stack 100 BDU) - as printed by distributor Rebor |
| product_type | battery distribution unit + base |
| region | GLOBAL |
| series | STACK100 |
| sku | — |
| status | — |
Electrical
| breaker_rating | — |
| max_continuous_current | 100A |
| note | Rebor also prints "~5.12kW per module @ 51.2V" alongside the 100A figure. |
| official_product_url |
https://www.dyness.com/stack100-integrated-photovoltaic-storage-systems
Dyness STACK100 integrated PV storage system (series page, covers the BDU and base)
|
| peak_current | 125A (2 minutes @ 25degC) |
| power_consumption | — |
| supply_voltage_nominal | — |
| supply_voltage_range | — |
Physical / mechanical
| colour | — |
| dimensions_mm | BDU 590 x 390 x 133.5; Base 590 x 390 x 100 |
| enclosure_material | — |
| mounting | base + stacked modules + BDU |
| weight_kg | — |
Installation
| installation_notes | STACK100 manual: "Connect the Inverter CAN/RS485 communication cable to the inverter RJ45 CAN/RS485 port"; external power cable to inverter maximum 3 m. |
| max_parallel_towers | up to 12 towers in parallel (up to 921 kWh) - per distributor Rebor |
| mounting_type | floor-standing stacked tower on a Base |
| supported_module_count | 3-15 STACK100 modules per tower (up to 76.8 kWh) |
Environment
| max_altitude_m | — |
| operating_temperature | — |
| relative_humidity | — |
| storage_temperature | — |
Interfaces & connectors
| bluetooth | — |
| can | True |
| cloud_api | — |
| communication_ports | ['Inverter CAN/RS485 RJ45 port'] |
| dry_contact | — |
| ethernet | — |
| local_api | — |
| modbus_rtu | — |
| modbus_tcp | — |
| mqtt | — |
| protocol_notes | Distributor lists "CAN / RS485 / WiFi". The STACK100 user manual instructs connecting the inverter CAN/RS485 communication cable to the inverter RJ45 CAN/RS485 port. No DIP switch or inverter protocol selection table was recoverable from the fetched pages of the STACK100 manual. |
| rs232 | — |
| rs485 | True |
| usb | — |
| wifi | True |
Protection
| ip_rating | IP20 (indoor installation) |
| overcurrent_protection | — |
| surge_protection | — |
Certifications
| marks | ['CE', 'UN38.3', 'IEC62619', 'IEC62477', 'IEC62040'] |
| note | Listed by distributor Rebor on the BDU & Base product page; may be system-level STACK100 certifications rather than BDU-only. |
| standards | ['CE', 'UN38.3', 'IEC62619', 'IEC62477', 'IEC62040'] |
Warranty & service
| terms | — |
| years | — |
Документи
user_manual
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Dyness STACK100 User Manual EN 0826 (official) — знайдено, не отримано
rev UNKNOWN
Додаткові задокументовані параметри
Записано дослівно з джерела; поля схеми для них поки немає.
| documented_relationship:inverter_battery_system | {"to_manufacturer": "multiple", "to_model": "Solis / GoodWe / Deye", "match_level": "brand", "relationship_type": "inverter_battery_system", "status": "verified_distributor", "source": "Rebor product page title", "source_url": "https://www.shop-rebor.com/en/products/dyness-stack100-bdu-base", "confidence": "distributor-verified", "notes": "BRAND-LEVEL ONLY, taken from a distributor page title. Not a manufacturer statement. Do not upgrade to model level."} |
| image_enrichment_pass | 2026-09-11 promote-existing-to-primary |
| manufacturer_legal_entity_as_printed | UNKNOWN |