FoxESS L07P
Official manufacturer GLOBAL перевірено 23 вересня 2026 р.
Identity
| category | ev_chargers |
| ean | — |
| firmware | {'documented_version': 'UNKNOWN', 'constraints': 'UNKNOWN'} |
| generation | — |
| manufacturer | FoxESS |
| market_version | — |
| model | L07P |
| mpn | — |
| product_family | L MAX |
| product_status | active |
| region | GLOBAL |
| release_year | — |
| series | L MAX Series |
| sku | — |
Electrical
| ac_output | 230±20%, 32A |
| ac_phase_configuration |
SINGLE-PHASE
L MAX Series-EV Charger Datasheet
|
| cable_length_m |
5 (Standard), 6 (Optional)
L MAX Series-EV Charger Datasheet
|
| charging_modes | Plug&Charge/RFID Card/App |
| connector | Type 2 plug |
| connector_type |
Type 2 plug
L MAX Series-EV Charger Datasheet
|
| input_voltage_v |
230+/-20%
L MAX Series-EV Charger Datasheet
|
| max_ac_current_a | 32 |
| max_charging_current_a |
32
L MAX Series-EV Charger Datasheet
|
| nominal_ac_voltage | 1P+N+PE, 230±20%, 32A, 50/60 Hz |
| nominal_frequency_hz | 50/60 |
| ocpp_version |
OCPP 1.6 JSON or OCPP 2.0.1
L MAX Series-EV Charger Datasheet
|
| official_product_url |
https://www.fox-ess.com/products/ev-charger/l-series
FoxESS L Series EV Charger
|
| phase_count | 1 |
| rated_ac_power_w | 7.3 |
| solar_surplus_charging |
True
L MAX Series-EV Charger Datasheet
|
| wiring_scheme |
1P+N+PE
L MAX Series-EV Charger Datasheet
|
Physical / mechanical
| ac_terminal | — |
| cooling | — |
| dc_connector | — |
| depth_mm | 105.0 |
| dimensions_mm | 196*197*105 |
| display | — |
| enclosure_material | — |
| height_mm | 197.0 |
| mounting | — |
| noise_db | — |
| weight_kg | 5 kg (Standard), 6 kg (Optional) |
| width_mm | 196.0 |
Installation
| cable_requirements | — |
| commissioning | — |
| installation_angle | — |
| mounting_clearances | — |
| torque | — |
Environment
| impact_protection | IK08 |
| ingress_protection | IP55 |
| max_altitude_m | ≤2000 |
| operating_temperature_c | -25 ~ 50 |
| pollution_degree | — |
| protective_class | — |
| relative_humidity_pct | 5 ~ 95, No condensation |
| storage_temperature_c | — |
Interfaces & connectors
| app | — |
| communication | ['Bluetooth', 'Wifi (2.4GHz)', 'Ethernet (RJ45)'] |
| dry_contact | — |
| meter_interface | — |
| modbus |
Open MODBUS interface
L MAX Series-EV Charger Datasheet
|
| monitoring_portal | — |
| protocols | ['OCPP 1.6 JSON or OCPP 2.0.1'] |
Protection
| anti_islanding | — |
| arc_fault | — |
| dc_switch | — |
| insulation_monitoring | — |
| overvoltage_category | — |
| rcmu | — |
| residual_current | DC 6 mA |
| reverse_polarity | — |
| surge_protection_ac | — |
| surge_protection_dc | — |
Certifications
| standards | ['CE', 'CB', 'RCM', 'UKCA', 'EN/IEC 61851-1: 2019', 'EN/IEC 61851-21-2: 2021'] |
Warranty & service
| conditions | — |
| extension_options | — |
| standard_years | — |
Документи
product_page
FoxESS L Series EV Charger
Додаткові задокументовані параметри
Записано дослівно з джерела; поля схеми для них поки немає.
| Charging Cable Length [m] | 5 (Standard), 6 (Optional) |
| Fox ESS EMS manual V1.0.4 | "SDM120CT (Single-phase ≤100A) 7.3KW" |
| Output | 230±20%, 32A |
| Rated Power | 7.3 |
| Solar linkage / PV integration | Yes |
| Start Modes | Plug&Charge/RFID Card/App |
| builder_completeness | partial |
| manufacturer_legal_entity_as_printed | Fox ESS |
| region_notes | Carried verbatim from ANMA's stored identity. |