Huawei SCharger-22KT-S0
Official manufacturer GLOBAL перевірено 22 вересня 2026 р.
Identity
| category | ev_chargers |
| connector_variant | Type 2 socket (untethered / socket outlet, no captive cable) |
| generation | — |
| manufacturer | Huawei |
| marketing_name | HUAWEI Smart Charger |
| model | SCharger-22KT-S0 |
| phase_support | Three-phase (supports three-phase or single-phase output) |
| predecessor | See separate FusionCharge AC AP07N-EU / AP22N-EU records - same enclosure dimensions and weights, relationship between the two part-number schemes is NOT documented in any fetched source |
| product_family | HUAWEI Smart Charger / FusionCharge AC (residential) |
| region | GLOBAL |
| region_scope | Global product page; EU/DE datasheets fetched |
| series | SCharger-S0 |
Electrical
| cable_cross_sectional_area | Up to 10 mm2 |
| charge_power | 1.4 kW to 22 kW |
| network_types | TN, TT |
| nominal_current | 6 - 32 A (3-phase or 1-phase) |
| nominal_frequency | 50 Hz / 60 Hz +/- 1 Hz |
| nominal_voltage | 400 V ± 20% (3-phase) |
| official_product_url |
https://solar.huawei.com/en/products/scharger-7ks-s0-22kt-s0/support/
SCharger-7KS-S0 / SCharger-22KT-S0 product support page
|
| phase_switchover | Three-phase to single-phase switchover, charging power as low as 1.4 kW to maximise photovoltaic utilisation |
| standby_consumption | < 6 W |
Physical / mechanical
| dimensions_mm | 335 mm x 180 mm x 145 mm |
| installation | Wall-mounted |
| installation_claim | Fast Installation in 15 Minutes (click-in design) |
| weight_kg | 3.1 |
Installation
| dynamic_load_balancing | Supported. Quoted: "Based on the solar irradiance and the power of other appliances, EV charging power is dynamically adjusted accordingly, to avert overload tripping and ensure reliable charging." |
| energy_management_host | FusionSolar app; can be managed by a HUAWEI SmartGuard (up to 2 chargers per SmartGuard) |
| included_accessories | 2 RFID cards (per German datasheet) |
| mounting | Wall-mounted |
| pv_surplus_charging | Supported via 'PV Power Preferred' working mode. Quoted: "HUAWEI Smart Charger comes with the unique PV power preferred mode, to prioritize the solar power charging of your electric vehicles and maximize green power consumption." German datasheet states this requires a compatible inverter with SmartDongle and a Smart Power Sensor. |
| working_modes | Normal Charge, Scheduled Charge, PV Power Preferred, Next Trip |
Environment
| altitude | <= 2000 m |
| humidity | 5% - 95% RH |
| operating_temperature | -35 °C to +50 °C @ 16 A, -35 °C to +40 °C @ 32 A |
| storage_temperature | -40 °C to +70 °C |
Interfaces & connectors
| authentication | RFID (ISO-14443-A), app, Bluetooth |
| bluetooth | Yes (used for authentication) |
| cellular | — |
| charger_status_indication | WRGB LED and app |
| communication | Wi-Fi / Ethernet |
| plc_iso15118 | — |
| protocol | Modbus TCP, OCPP 1.6 (see data_conflicts - one source prints "OCPP 1.62") |
| remote_control | App |
| rfid_standard | ISO-14443-A |
| vehicle_connection | Type 2 socket |
Protection
| cable_protection | Cable E-Lock via app |
| degree_of_protection | IP54 |
| fire_class | UL94 |
| impact_protection | IK10 |
| over_temperature_protection | Yes |
| overcurrent_protection | IEC 61851-1 |
| residual_current_protection | Type A (30 mA) + DC 6 mA integrated |
| surge_protection | CAT II |
Certifications
| grid_codes | — |
| standards | EN 61851-1 2019, IEC 62955:2018, IEC 61008-1 2010, IEC/EN 62196-1 |
| standards_source_note | This standards list is printed on the FusionCharge AC (AP07N-EU / AP22N-EU) datasheet fetched from a distributor CDN, NOT on the SCharger-S0 datasheets. It is recorded here because the fetched SCharger datasheets cite "IEC 61851-1" for overcurrent protection, but the full list has NOT been verified for this exact model - treat as unverified. |
Warranty & service
| extension_options | — |
| standard_warranty | — |
Документи
user_manual
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Smart Charger User Manual (SmartCharger-7KS-S0, SmartCharger-22KT-S0) EDOC1100260967 — знайдено, не отримано
rev UNKNOWN
Зафіксовані конфлікти
interfaces.protocol Review required
Modbus TCP, OCPP 1.62 — https://solar.huawei.com/en/products/scharger-7ks-s0-22kt-s0/specs/
Modbus TCP, OCPP 1.6 — https://solar.huawei.com/-/media/SolarV4/solar-version2/common/professionals/all-products/residential/smart-charger/SCharger-7KS-S0_SCharger-22KT-S0.pdf
Modbus TCP and OCPP 1.6 — https://solar.huawei.com/admin/asset/v1/pro/view/a1adf14392d644c1b432f62ea10fa0ff.pdf
Додаткові задокументовані параметри
Записано дослівно з джерела; поля схеми для них поки немає.
| SCharger product page | "It supports three-phase switchover to single-phase, providing obtainable charging power as low as 1.4 kW" |
| image_enrichment_pass | 2026-09-11 |
| manufacturer_legal_entity_as_printed | Huawei Technologies Co., Ltd. |