База знань › Gateways / Data Loggers
SerialComm (Jeddy Ventures LLC) ETH-SER-EE9
Manufacturer documented NORTH_AMERICA
Identity
| category | gateways |
| manufacturer | SerialComm (Jeddy Ventures LLC) |
| manufacturer_part_number | ETH-SER-EE9 |
| model | ETH-SER-EE9 |
| mpn | ETH-SER-EE9 |
| product_family | SerialComm Ethernet to Serial Servers |
| product_status | active |
| region | NORTH_AMERICA |
| series | — |
| variant | — |
Electrical
| galvanic_isolation |
Not printed - treat as absent; ESD and surge protection are NOT isolation
ETH-SER-EE9 — official product page — Specifications
|
| operating_modes |
TCP server, TCP client, UDP, and a Windows virtual serial (COM) driver mode
ETH-SER-EE9 — official product page — Specifications
|
| power_consumption |
0.80 W no-load, 0.84 W full-load at 12 V DC
ETH-SER-EE9 — official product page — Specifications
|
| power_input |
9-48 V DC; supplied with a 12 V DC 1 A adapter (100-240 V AC 50/60 Hz)
ETH-SER-EE9 — official product page — Specifications
|
Physical / mechanical
| dimensions |
100 x 69 x 22 mm
ETH-SER-EE9 — official product page — Specifications
|
Installation
| din_rail_mounting |
Optional DIN rail mounting kit (accessory)
ETH-SER-EE9 — official product page — Specifications
|
Environment
| operating_temperature |
-40 °C to +85 °C
ETH-SER-EE9 — official product page — Specifications
|
Interfaces & connectors
| device_type | serial device server (Ethernet-to-serial converter) |
| ethernet_interface |
10/100 Mbps, RJ45
ETH-SER-EE9 — official product page — Specifications
|
| home_assistant_modbus_tcp_suitable | False |
| home_assistant_suitability_basis | Transparent serial tunnel only. The product page's protocol list is TCP, UDP, ARP, ICMP and DHCP, and the operating modes offered are TCP server, TCP client, UDP and a Windows virtual COM driver. A NONE-forcing read returned no occurrence of 'Modbus' on the product page or in the SerialComm Ethernet-to-serial category page. No Modbus TCP to Modbus RTU conversion is documented, so a standard Modbus TCP client cannot address a serial Modbus RTU slave through it. |
| modbus_support |
Not printed anywhere on the product page
ETH-SER-EE9 — official product page — Specifications
|
| protocols |
TCP, UDP, ARP, ICMP, DHCP
ETH-SER-EE9 — official product page — Specifications
|
| serial_baud_rate_range |
300 bps to 115,200 bps
ETH-SER-EE9 — official product page — Specifications
|
| serial_connector |
DB9 male for RS-232; 5-position screw terminal block for RS-485/RS-422
ETH-SER-EE9 — official product page — Specifications
|
| serial_data_bits |
5, 6, 7 or 8
ETH-SER-EE9 — official product page — Specifications
|
| serial_flow_control |
None, RTS/CTS hardware or XON/XOFF software
ETH-SER-EE9 — official product page — Specifications
|
| serial_parity |
None, Even, Odd, Space or Mark
ETH-SER-EE9 — official product page — Specifications
|
| serial_port_count |
2 physical serial interfaces: 1 x RS-232 and 1 x RS-485/RS-422
ETH-SER-EE9 — official product page — Specifications
|
| serial_standards |
RS-232 on the DB9M; RS-485 2-wire and RS-422 4-wire on the terminal block
ETH-SER-EE9 — official product page — Specifications
|
Protection
| esd_protection |
1.5 kV on the LAN port; 15 kV on the serial ports
ETH-SER-EE9 — official product page — Specifications
|
| surge_protection |
600 W surge protection
ETH-SER-EE9 — official product page — Specifications
|
Certifications
| certifications |
CE (EU Directive 2014/30/EU), FCC Part 15B, RoHS 2.0, REACH SVHC 247
ETH-SER-EE9 — official product page — Specifications
|
Документи
datasheet
ETH-SER-EE9 datasheet
product-page
ETH-SER-EE9 — official product page
technical-manual
ETH-SER-EE9 User Manual