База знань › Gateways / Data Loggers
Sollae Systems CSE-H55N2
Manufacturer documented GLOBAL
Identity
| category | gateways |
| manufacturer | Sollae Systems |
| manufacturer_part_number | CSE-H55N2 |
| model | CSE-H55N2 |
| mpn | CSE-H55N2 |
| product_family | — |
| product_status | active |
| region | GLOBAL |
| series | — |
| variant | — |
Electrical
| current_consumption_ma |
190 typical mA
CSE-H55N2 User Manual — Specification table
|
| operating_modes |
TCP Server, TCP Client, AT Command, UDP
CSE-H55N2 User Manual — Specification table, 'Communication mode'
|
| supply_voltage |
DC 5 V (+/-10%)
CSE-H55N2 User Manual — Specification table, 'Input power'
|
Physical / mechanical
| dimensions_mm |
94 x 57 x 24
CSE-H55N2 User Manual — Specification table
|
| weight_g |
about 64 g
CSE-H55N2 User Manual — Specification table
|
Environment
| operating_temperature_range_c |
-40 to +85 degC
CSE-H55N2 User Manual — Specification table
|
Interfaces & connectors
| default_ip_address |
10.1.0.1, subnet mask 255.0.0.0
CSE-H55N2 User Manual — Specification table / factory defaults
|
| default_tcp_port |
1470
CSE-H55N2 User Manual — Specification table / factory defaults
|
| device_type | serial device server / RS422-RS485 to Ethernet converter |
| ethernet_spec |
10Base-T or 100Base-TX auto-sensing, RJ45
CSE-H55N2 User Manual — Specification table
|
| home_assistant_modbus_tcp_suitable | False |
| home_assistant_suitability_basis | Sollae documents no Modbus function at all for this product: the printed protocol list is TCP/UDP/IP stack and network services only, and the operating modes are TCP Server (T2S), TCP Client (COD), AT Command (ATC) and UDP (U2S) - i.e. a transparent serial-over-TCP tunnel, NOT a Modbus TCP-to-RTU gateway. A Home Assistant Modbus TCP integration would not be able to talk to a Modbus RTU slave behind it without a separate RTU-over-TCP handling. |
| protocols |
TCP, UDP, IPv4/IPv6 dual stack, ICMP, ARP, DHCP, PPPoE, DNS, DDNS, Telnet, SSL
CSE-H55N2 User Manual — Specification table, 'Network' row
|
| rs232 |
false - not offered on this model
CSE-H55N2 User Manual — Specification table, 'Serial' row
|
| rs422 |
true
CSE-H55N2 User Manual — Specification table, 'Serial' row: 'RS422 / RS485'
|
| rs485 |
true
CSE-H55N2 User Manual — Specification table, 'Serial' row: 'RS422 / RS485'
|
| serial_baud_rate_range |
300 to 230,400 bps
CSE-H55N2 User Manual — Specification table
|
| serial_connector |
6-pin terminal block
CSE-H55N2 User Manual — Specification table
|
| serial_data_bits |
8 / 7
CSE-H55N2 User Manual — Specification table
|
| serial_parity |
NONE / EVEN / ODD / MARK / SPACE
CSE-H55N2 User Manual — Specification table
|
| serial_port_count |
1
CSE-H55N2 User Manual — Specification table
|
| serial_signal_lines |
TX+, TX-, RX+, RX-, TRX+, TRX-, GND (depending on RS422 or RS485 configuration)
CSE-H55N2 User Manual — Specification table
|
| serial_stop_bits |
1 / 1.5 / 2
CSE-H55N2 User Manual — Specification table
|
Certifications
| certifications |
KC, CE, FCC, RoHS compliant
CSE-H55N2 User Manual — Specification table, 'Approvals'
|
Документи
datasheet
CSE-H55N2 Datasheet
product-page
CSE-H55N2 — official product page
technical-manual
CSE-H55N2 User Manual