Schneider Electric XW Pro 8548 (230 V)
Official manufacturer EU перевірено 22 вересня 2026 р.
Невирішений конфлікт щодо безпеки
Два джерела подають різні значення для цього продукту, і ніхто цього не вирішив. Характеристики нижче показано так, як їх записано, але цей продукт не можна вважати перевіреним для інженерних цілей, доки конфлікт не закрито.
Два джерела подають різні значення для цього продукту, і ніхто цього не вирішив. Характеристики нижче показано так, як їх записано, але цей продукт не можна вважати перевіреним для інженерних цілей, доки конфлікт не закрито.
Identity
| category | inverters |
| ean | — |
| firmware | {'documented_version': 'UNKNOWN', 'constraints': 'UNKNOWN'} |
| generation | — |
| manufacturer | Schneider Electric |
| market_version | IEC / 230 V (EMEA) |
| model | XW Pro 8548 (230 V) |
| mpn | 865-8548-55 |
| product_family | Conext XW Pro |
| product_status | discontinued |
| region | EU |
| release_year | — |
| series | XW Pro |
| sku | 865-8548-55 |
Electrical
| ac_connection | single phase; 3-phase stacking supported |
| ac_voltage_range | — |
| battery_capacity_range_kwh | — |
| battery_communication | — |
| battery_max_charge_current_a | — |
| battery_max_charge_power_w | — |
| battery_max_discharge_current_a | — |
| battery_max_discharge_power_w | — |
| battery_nominal_battery_voltage_v | — |
| battery_type | — |
| battery_voltage_range_v | — |
| eps_peak_power | 8.5 kW for 30 minutes; 12 kW for 1 minute |
| eps_phase | — |
| eps_rated_power_va | — |
| eps_switchover_time_ms | — |
| eps_voltage | — |
| european_efficiency_pct | — |
| external_transfer_switch_required | — |
| frequency_range_hz | — |
| inrush_current | — |
| max_ac_active_power_w | 6.8 kW continuous; 8.5 kW for 30 minutes; 12 kW for 1 minute |
| max_ac_current_a | 53 |
| max_apparent_power_va | — |
| max_backfeed_current_a | — |
| max_dc_input_power_w | — |
| max_dc_voltage_v | — |
| max_efficiency_pct | 95.0 |
| max_input_current_per_mppt_a | — |
| max_output_fault_current_a | — |
| max_short_circuit_current_per_mppt_a | — |
| mppt_efficiency_pct | — |
| mppt_voltage_range_v | — |
| night_self_consumption_w | — |
| nominal_ac_voltage | 230 V output, single phase and 3-phase stacking |
| nominal_dc_voltage_v | 48 |
| nominal_frequency_hz | — |
| number_of_mppt | — |
| official_manual_url |
https://solar.se.com/eu/wp-content/uploads/sites/4/2021/08/XW-Pro-IEC-Install-Guide_990-91403.pdf
Conext XW Pro Installation Guide (IEC), document 990-91403D-01, June 2023
|
| overload_rating | 1.75x high overload power rating for backup power operation |
| parallel_capability | single phase and 3-phase stacking |
| phase_count | 1 |
| power_factor_range | — |
| rated_ac_power_w | 6800 |
| rated_mppt_voltage_range_v | — |
| startup_voltage_v | — |
| strings_per_mppt | — |
| thd_pct | — |
Physical / mechanical
| ac_terminal | — |
| cooling | — |
| dc_connector | — |
| depth_mm | — |
| dimensions_mm | — |
| display | — |
| enclosure_material | — |
| height_mm | — |
| mounting | — |
| noise_db | — |
| weight_kg | — |
| width_mm | — |
Installation
| cable_requirements | — |
| commissioning | — |
| installation_angle | — |
| mounting_clearances | — |
| torque | — |
Environment
| ingress_protection | IP 20 |
| max_altitude_m | — |
| operating_temperature_c | -25 to +70 |
| pollution_degree | — |
| protective_class | — |
| relative_humidity_pct | — |
| storage_temperature_c | — |
Interfaces & connectors
| app | — |
| communication | [] |
| dry_contact | — |
| meter_interface | — |
| monitoring_portal | — |
| protocols | [] |
Protection
| anti_islanding | — |
| arc_fault | — |
| dc_switch | — |
| insulation_monitoring | — |
| overvoltage_category | — |
| rcmu | — |
| reverse_polarity | — |
| surge_protection_ac | — |
| surge_protection_dc | — |
Warranty & service
| conditions | — |
| extension_options | — |
| standard_years | — |
Документи
installation_manual
Conext XW Pro Installation Guide (IEC), document 990-91403D-01, June 2023
installation_manual
Conext XW Pro Operation Guide (IEC), document 990-91402C
Зафіксовані конфлікти
rated_pv_input_voltage_v Review required
48 — value currently stored in ANMA
None — https://solar.se.com/eu/wp-content/uploads/sites/4/2021/08/DS20210129-Conext-XW-Pro-IEC.pdf
document-revision
Додаткові задокументовані параметри
Записано дослівно з джерела; поля схеми для них поки немає.
| AC output Continuous power at 25°C / Overload (30 min / 60 s) | 6800 W / 8500 W / 12000 W |
| DC input Maximum input current | 180 A |
| battery.communication | UNKNOWN |
| battery.max_charge_current_a | UNKNOWN |
| battery.max_charge_power_w | UNKNOWN |
| battery.max_discharge_current_a | UNKNOWN |
| battery.max_discharge_power_w | UNKNOWN |
| battery.nominal_battery_voltage_v | UNKNOWN |
| rejected_document_entry | {"type": "datasheet", "title": "XW Pro IEC Datasheet", "url": "UNKNOWN", "revision": "UNKNOWN", "language": "en", "region": "EU", "publication_date": "UNKNOWN", "is_official": true, "located_not_fetched": true} |
| solar.se.com product page marketing copy | 'The XW Pro solar hybrid inverter is the heart of your home power system' |