ANMASystem BuildingAutomation, Network, Monitoring & Analytics
PREMIUM

Knowledge BaseBatteries

Dyness PowerBox Pro

Unknown Global verified Sept. 2, 2026

Identity

category batteries
ean UNKNOWN
generation Pro
hardware_revision UNKNOWN
legacy_name UNKNOWN
manufacturer Dyness
market_version UNKNOWN
model PowerBox Pro
mpn UNKNOWN
product_family Dyness PowerBox (PowerBox G2 / PowerBox Pro / PowerBox G3)
product_status active
product_status_evidence Listed on the dyness.com residential Low Voltage ESS index, has a live official product page, and appears in the dyness.com download centre roster; all checked 2026-09-02.
region Global
release_year UNKNOWN (earliest located official datasheet revision is dated 2025-02-28; page image assets are dated 2024-03-28, but no release year is printed)
sku UNKNOWN
subcategory low-voltage 48V-class wall-mounted battery
variant_note Only one capacity/voltage variant (51.2 V / 200 Ah / 10.24 kWh) is published.

Electrical

cell_chemistry LiFePO4
cell_type UNKNOWN
continuous_charge_current_a 100 (recommended)
continuous_discharge_current_a 100 (recommended)
continuous_power_kw 5.12
cycle_life >=6000 cycles
depth_of_discharge_pct 95
max_charge_current_a UNKNOWN (only a 'recommended' 100 A is published)
max_charge_power_kw UNKNOWN
max_discharge_current_a UNKNOWN (only a 'recommended' 100 A is published)
max_discharge_power_kw 10.24 (published as 'Peak Power'; no duration given)
max_parallel_units CONFLICT - see data_conflicts (official page says 50, MEDA Solar NZ distributor page says 5)
max_series_units N/A (LV parallel stack)
nominal_capacity_ah 200
nominal_energy_kwh 10.24
nominal_voltage_v 51.2
note SAFETY-CRITICAL DISTINCTION: 5.12 kW is the NOMINAL/continuous power and 10.24 kW is the PEAK power with no stated duration - they are not interchangeable. Both the charge and discharge currents quoted (100 A) are labelled 'recommended', not maximum; no absolute maximum current is published for this model.
operating_voltage_max_v 57.6
operating_voltage_min_v 44.8
parallel_supported yes
peak_charge_current_a UNKNOWN
peak_discharge_current_a UNKNOWN (a 10.24 kW peak POWER is published but no peak current in amperes and no peak duration)
peak_power_kw 10.24 (duration not stated)
round_trip_efficiency_pct UNKNOWN
series_supported no (low-voltage parallel-only architecture)
system_energy_max_kwh UNKNOWN (depends on the unresolved parallel-unit conflict)
system_energy_min_kwh 10.24
usable_energy_kwh 9.728 (inferred: 10.24 kWh x 95% DoD; no usable-energy figure is printed by either source)

Physical / mechanical

cooling_method UNKNOWN
depth_mm 210
height_mm 928
installation_notes UNKNOWN
ip_rating IP65
mounting_type ['wall']
rack_units N/A (wall-mounted enclosure)
weight_kg CONFLICT - see data_conflicts (official page 99.3 kg, MEDA Solar NZ 103 kg)
width_mm 555

Installation

indoor_outdoor indoor and outdoor (IP65)
installation_notes UNKNOWN
mounting_orientation wall-mounted

Environment

charge_temperature_range_c 0C to 55C
discharge_temperature_range_c -20C to 55C
indoor_outdoor indoor and outdoor (IP65)
max_altitude_m UNKNOWN
note The charge and discharge windows DIFFER: charging is not permitted below 0C, discharging is permitted to -20C.
operating_humidity UNKNOWN
operating_temperature_max_c 55
operating_temperature_min_c -20
storage_temperature_max_c UNKNOWN
storage_temperature_min_c UNKNOWN

Interfaces & connectors

bluetooth UNKNOWN
can yes
communication_ports CAN / RS485 / RS232
dry_contact UNKNOWN
ethernet UNKNOWN
modbus_rtu UNKNOWN
modbus_tcp UNKNOWN
protocol_notes No DIP-switch protocol table was obtained; the official datasheet PDF is robots-blocked and the ManualsLib mirror of the user manual was not fetched.
rs232 yes
rs485 yes
usb UNKNOWN
wifi UNKNOWN

Protection

fire_suppression UNKNOWN
heating UNKNOWN
ip_rating IP65
over_current UNKNOWN
over_temperature UNKNOWN
over_voltage UNKNOWN
short_circuit UNKNOWN
under_voltage UNKNOWN

Certifications

confidence distributor-verified
note This certification list comes only from the MEDA Solar NZ distributor page (document 2), not from a Dyness-published document. Not officially verified.
safety_certifications ['CE-EMC', 'UKCA']
standards ['IEC62619', 'IEC62040', 'IEC60730', 'CEC']
transport_certifications ['UN38.3']

Warranty & service

conditions UNKNOWN
confidence distributor-verified
note No warranty period is printed on the official dyness.com PowerBox Pro page; only the distributor states 10 years.
summary '10-year warranty' per the MEDA Solar NZ distributor page.
years 10

Documents

datasheet {# Located but never retrieved: listed, but deliberately not linked, and it backs no stored value. #} Dyness Powerbox Pro datasheet EN 2025-02-28 — located, not retrieved rev UNKNOWN
distributor-page Dyness Powerbox Pro wall-mounted battery 10kWh - distributor product page (MEDA Solar NZ) rev UNKNOWN
product-page PowerBox Pro - Low voltage residential energy storage batteries (official product page) rev UNKNOWN

Recorded conflicts

electrical.max_parallel_units Review required
50 — Dyness official PowerBox Pro product page, spec table 'Expansion' = 'Up to 50 units in parallel'
5 — MEDA Solar NZ distributor page, 'Maximum Parallel Units: Up to 5 units in parallel'
physical.weight_kg Review required
99.3 kg — Dyness official PowerBox Pro product page, spec table 'Net Weight' = '99.3kg'
103 kg — MEDA Solar NZ distributor page, 'Weight: 103 kg'

Additional documented parameters

Recorded verbatim from the source; no schema field exists for these yet.

Compatible Inverters (MEDA)Growatt, Victron, Goodwe, and SMA
ExpansionUp to 50 units in parallel
Nominal Power5.12kW
Peak Power10.24kW

Build a system with this product