Knowledge Base › External MPPT Controllers
Victron Energy SmartSolar MPPT 100/50
Official manufacturer global verified Sept. 2, 2026
Identity
| category | external_mppt_controllers |
| ean | UNKNOWN |
| generation | UNKNOWN |
| manufacturer | Victron Energy B.V. |
| market_version | UNKNOWN |
| model | SmartSolar MPPT 100/50 |
| mpn | SCC110050210 |
| product_family | SmartSolar MPPT 100/30 & 100/50 |
| product_status | active |
| region | global |
| release_year | UNKNOWN |
| sku | SCC110050210 |
| sku_source | 'SCC110050210 SmartSolar MPPT 100/50' |
Electrical
| battery_voltage_auto_select | True |
| battery_voltage_locator | 'Battery voltage: 12/24V Auto Select' |
| battery_voltage_options_v | [12, 24] |
| charge_algorithm | Multi-stage adaptive (eight pre-programmed algorithms) or user defined algorithm |
| charge_voltage_absorption_v | Default: 14.4 V / 28.8 V (adjustable) |
| charge_voltage_equalization_v | 16.2 V / 28.8 V (adjustable) as printed in the SmartSolar manual; disabled by default |
| charge_voltage_float_v | Default: 13.8 V / 27.6 V (adjustable) |
| load_output_continuous_current_a | none - this model has no load output |
| max_charge_current_a | 50 |
| max_charge_current_locator | 'Rated charge current' (datasheet) |
| max_pv_open_circuit_voltage_locator | 'Maximum PV open circuit voltage' = 100 V |
| max_pv_open_circuit_voltage_v | 100 |
| max_pv_power_locator | 'Nominal PV power, 12 V' / 'Nominal PV power, 24 V' |
| max_pv_power_w_by_battery_voltage | {'12': 700, '24': 1400} |
| max_pv_short_circuit_current_a | 60 |
| max_pv_short_circuit_current_locator | 'Max. PV short circuit current' |
| mppt_operating_voltage_max_v | UNKNOWN (no separate start-up/operating maximum published for this family) |
| mppt_operating_voltage_min_note | 'PV voltage must exceed battery voltage + 5V to start; minimum thereafter is battery voltage + 1V' |
| num_trackers | UNKNOWN |
| num_trackers_note | Victron does not publish a 'number of MPP trackers' row for this model in any document fetched this session; the unit has a single PV input pair. Recorded as UNKNOWN rather than assumed. (For the 150/60 and larger families the manual does state MC4 connector pairs are internally parallel-connected to a single MPPT tracker.) |
| peak_efficiency_pct | 98 |
| self_consumption | 12 V: 30 mA / 24 V: 20 mA |
| temperature_compensation | 12 V: -16 mV/degC / 24 V: -32 mV/degC |
Physical / mechanical
| bracket_dimensions_mm | 176 x 186 x 71.5 (overall outline including mounting flanges, dimension drawing) |
| depth_mm | 70 |
| dimensions_locator | 'Dimensions (h x w x d) 130 x 186 x 70 mm' |
| enclosure_material | UNKNOWN |
| height_mm | 130 |
| housing_color | Blue (RAL 5012) |
| mounting_hole_diameter_mm | 5 (100/30 drawing, corner radius R4) |
| mounting_hole_spacing_mm | 122 x 131 (100/30 drawing) / 132 x 122 (100/50-150/35-150/45 drawing) |
| mounting_type | ['wall'] |
| power_terminals | 16 mm2 / AWG6 |
| shipping_weight_kg | UNKNOWN |
| weight_kg | 1.3 |
| width_mm | 186 |
| wire_cross_section_mm2 | 16 mm2 / AWG6 |
Installation
| altitude_derating_note | 5000m (full rated output up to 2000m) |
| indoor_outdoor | Indoor type 1, unconditioned |
| max_installation_altitude_m | 5000 |
| mounting_orientation | UNKNOWN |
Environment
| cooling_method | UNKNOWN (no fan row published) |
| ip_rating | IP43 (electronics), IP22 (connection area) |
| max_altitude_m | 5000 |
| nema_rating | UNKNOWN |
| operating_temperature_c | -30 to +60 (full rated output up to 40) |
| pollution_degree | PD2 |
| relative_humidity | 95%, non-condensing |
| storage_temperature_c | UNKNOWN |
Interfaces & connectors
| battery_terminal_type | screw terminal, 16 mm2 / AWG6 |
| bluetooth | Yes - built in. Manual: 'Data communication: VE.Direct port, Bluetooth via VictronConnect app' |
| ethernet | UNKNOWN |
| load_output | False |
| pv_connector_type | screw terminal, 16 mm2 / AWG6 |
| relay_outputs | UNKNOWN (not published for this family) |
| remote_on_off | UNKNOWN |
| rs485 | UNKNOWN |
| ve_can | False |
| ve_direct | Yes - 'Data communication port: VE.Direct' |
| wifi | UNKNOWN |
Protection
| over_temperature | Yes |
| over_voltage | UNKNOWN |
| pv_reverse_polarity | UNKNOWN - the SmartSolar manual lists only 'Output short circuit, over temperature' for this family, while the BlueSolar datasheet lists 'PV reverse polarity, output short circuit, over-temperature' |
| short_circuit | Output short circuit |
| under_voltage | UNKNOWN |
Certifications
| standards | ['EN/IEC 62109-1', 'UL 1741', 'CSA C22.2 NO.107.1-16'] |
Warranty & service
| summary | 5 years - official product page: 'industry-leading 5-year standard warranty' |
Documents
dimension-drawing
Dimension drawing BlueSolar & SmartSolar MPPT 100/50, 150/35, 150/45
Recorded conflicts
environment.pollution_degree Review required
PD3 (100/30 column) — document[1]
PD2 (100/50 column) — document[1]
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Charge algorithm | Multi-stage adaptive (eight pre-programmed algorithms) or user defined algorithm |
| Colour | Blue (RAL 5012) |
| Environmental condition | Indoor type 1, unconditioned |
| Pollution degree | PD2 |