ANMA System Building

Identity

brand	Victron
category	external_mppt_controllers
ean	UNKNOWN
generation	UNKNOWN
manufacturer	Victron Energy disputed
market_version	UNKNOWN
model	SmartSolar MPPT 150/100-Tr VE.Can
mpn	SCC115110410 / SCC115110411 disputed
product_family	SmartSolar MPPT 150/70 up to 250/100 VE.Can disputed
product_revision	UNKNOWN
product_status	active
region	global
release_year	UNKNOWN
sku	SCC115110410 / SCC115110411 (both listed as 'SmartSolar MPPT 150/100-Tr VE.Can' on the official dimension drawing) disputed
variant_note	The same dimension drawing also lists 'SCC115110420 BlueSolar MPPT 150/100-Tr VE.Can' — a separate BlueSolar-branded unit in the identical enclosure. Do not merge the two records. disputed

Electrical

battery_voltage_auto_select	True disputed
battery_voltage_class	LV
battery_voltage_locator	'Battery voltage 12/24/48 V Auto Select (36 V: manual)'
battery_voltage_options_v	[12, 24, 48] disputed
charge_algorithm	Multi-stage adaptive (eight pre-programmed algorithms) or user defined
charge_voltage_absorption_v	14.4 / 28.8 / 43.2 / 57.6 V (adjustable)
charge_voltage_equalization_v	16.2 / 32.4 / 48.6 / 64.8 V (adjustable); disabled by default
charge_voltage_float_v	13.8 / 27.6 / 41.4 / 55.2 V (adjustable)
communication_can	True
communication_rs485	UNKNOWN
communication_ve_direct	True
communication_wifi	UNKNOWN (Bluetooth Smart is built into SmartSolar hardware; not itemized as a separate spec row in this datasheet excerpt)
device_type	external MPPT solar charge controller
load_output_continuous_current_a	none - this model has no load output
max_charge_current_a	100 BlueSolar / SmartSolar charge controller MPPT 250/70, 150/100 & 250/100 VE.Can — Datasheet — spec row 'Rated charge current: 100A'
max_charge_current_locator	Datasheet 'Rated charge current'; manual 'Maximum battery current'
max_pv_current_per_mc4_connector_a	30
max_pv_current_per_mc4_connector_locator	'Maximum current per MC4 connector is 30A' - per-connector limit, NOT the array short-circuit rating
max_pv_open_circuit_voltage_locator	'Max. PV Open circuit Voltage (absolute maximum)' = 150 V - 'absolute maximum coldest conditions'
max_pv_open_circuit_voltage_note	150V is the absolute maximum PV Voc under coldest conditions per the datasheet; 145V is the documented maximum start-up/operating PV voltage.
max_pv_open_circuit_voltage_v	150 BlueSolar / SmartSolar charge controller MPPT 250/70, 150/100 & 250/100 VE.Can — Datasheet — spec row 'Maximum PV open circuit voltage: 150V resp. 250V absolute maximum coldest conditions / 145V resp. 245V start-up and operating maximum'
max_pv_power_locator	'Nominal PV power, 12 V / 24 V / 36 V / 48 V'
max_pv_power_w_by_battery_voltage	{'12': 1450, '24': 2900, '36': 4350, '48': 5800}
max_pv_short_circuit_current_a	70 BlueSolar / SmartSolar charge controller MPPT 250/70, 150/100 & 250/100 VE.Can — Datasheet — spec row 'Max. PV short circuit current: 70A'
max_pv_short_circuit_current_datasheet_a	70
max_pv_short_circuit_current_manual_a	70
mppt_operating_voltage_max_locator	'Max. PV Open circuit Voltage (start-up/operating)' = 145 V
mppt_operating_voltage_max_v	145
mppt_operating_voltage_min_note	'The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter minimum PV voltage is Vbat + 1V.'
num_trackers	1
num_trackers_locator	Manual: MC4 connectors are internally parallel-connected to a single MPPT tracker
parallel_controller_note	Multiple SmartSolar/BlueSolar units are commonly run in parallel on a shared battery bus, each an independent charger with its own PV input; Victron does not publish a maximum controller count for this configuration.
parallel_controller_support	True
parallel_operation	Yes, parallel synchronised operation via VE.Can (max. 25 units) or Bluetooth (max. 10 units)
peak_efficiency_pct	98
self_consumption	less than 35 mA @ 12 V / 20 mA @ 48 V
supported_battery_systems	UNKNOWN — no discrete "officially supported battery brands" list is published for this charge controller the way Victron publishes one for its inverters; it charges to a configurable voltage/algorithm rather than pairing with named battery models.
supported_inverter_ecosystems	['Victron VE.Bus systems (MultiPlus / MultiPlus-II / Quattro) sharing the same battery bus; full cross-monitoring/sync with a VE.Bus system typically needs a Cerbo/GX device to bridge VE.Can and VE.Bus', 'Victron VE.Can devices directly']
temperature_compensation	-16 mV/degC / -32 mV/degC / -48 mV/degC / -64 mV/degC (manual); datasheet prints -16 / -32 / -64 mV/degC

Physical / mechanical

bracket_dimensions_mm	294.6 x 268.6 (bracket/overall outline on the dimension drawing; note this differs from the datasheet enclosure figure 216 x 295 x 103 mm because the drawing outline includes the mounting brackets) disputed
cable_entry_positions	UNKNOWN
cable_gland_sizes	UNKNOWN
depth_mm	103
dimensions_locator	'Dimensions (h x w x d)': Tr 216x295x103 mm; MC4 246x295x103 mm
enclosure_material	UNKNOWN
height_mm	216 disputed
housing_color	Blue (RAL 5012)
mounting_bolt_size	UNKNOWN
mounting_hole_diameter_mm	8 (slot width 5.2)
mounting_hole_spacing_mm	horizontal 213.9, vertical 144.1 Dimension drawing — SmartSolar MPPT Tr VE.Can (XL) — dimension drawing, hole-centre dimensions 213.9 mm horizontal / 144.1 mm vertical
mounting_plate_dimensions_mm	UNKNOWN
mounting_type	['wall']
power_terminals	PV: 35 mm2 / AWG2 (Tr) or 3 pairs of MC4 connectors (MC4). Battery: 35 mm2 / AWG2
screw_sizes	UNKNOWN
shipping_weight_kg	UNKNOWN
terminal_locations	Battery (+/-) and PV (+/-) screw terminals centred on the front face; VE.Direct at lower left; 2 x VE.Can RJ45, programmable relay (NO/C/NC) and remote on/off (H/L) at lower right; earth stud on the left heatsink foot (official product photograph 'SmartSolar MPPT 150-100-Tr VE Can (front).png')
torque_specs	Battery and PV connections 2.4 Nm MPPT solar charger manual — SmartSolar MPPT 150/70 up to 250/100 VE.Can — manual p.14, 'Torque the battery and PV connections at 2.4Nm'
weight_kg	4.5
width_mm	295 BlueSolar / SmartSolar charge controller MPPT 250/70, 150/100 & 250/100 VE.Can — Datasheet — spec row 'Dimensions (h x w x d): 216 x 295 x 103 mm'
wire_cross_section_mm2	35 mm2 / AWG2 (both PV and battery, Tr version) disputed

Installation

altitude_derating_note	full rated output up to 2000 m disputed
battery_proximity_rule	Mount within 3 metres of the battery, but never directly above the battery
clearance_bottom_mm	100
clearance_front_mm	UNKNOWN
clearance_left_mm	UNKNOWN
clearance_right_mm	UNKNOWN
clearance_top_mm	100
cooling_airflow_requirements	UNKNOWN
direct_sunlight_restriction	UNKNOWN
indoor_outdoor	Indoor, unconditioned
installation_humidity_range	UNKNOWN
installation_temperature_range_c	UNKNOWN
max_installation_altitude_m	5000
minimum_wall_thickness_mm	UNKNOWN
mounting_orientation	vertical, with the electrical terminals facing downwards MPPT solar charger manual — SmartSolar MPPT 150/70 up to 250/100 VE.Can — manual p.11, 'Mount the solar charger vertically on a non-flammable substrate, with the electrical terminals facing downwards'
orientation_allowed	['vertical']
orientation_forbidden	UNKNOWN
surface_requirements	non-flammable substrate
two_person_lift_required	UNKNOWN
ventilation_requirements	minimum clearance of 10 cm under and above the unit for optimal cooling MPPT solar charger manual — SmartSolar MPPT 150/70 up to 250/100 VE.Can — manual p.11, 'Observe a minimum clearance of 10cm under and above the solar charger for optimal cooling'

Environment

cooling_method	UNKNOWN (a large passive heatsink is visible in the official product photography, but no cooling-method spec row is published)
corrosion_class	UNKNOWN
fan_replaceable	UNKNOWN
ik_rating	UNKNOWN
ip_rating	IP43 (electronic components), IP22 (connection area)
max_altitude_m	5000
nema_rating	UNKNOWN
noise_level_db	UNKNOWN
operating_temperature_c	-30 to +60 (full rated output up to 40)
pollution_degree	PD3 SmartSolar MPPT 150/70 up to 250/100 VE.Can — HTML manual, Technical specifications page — technical specification table, 'Pollution degree PD3'
relative_humidity	95%, non-condensing disputed
salt_mist_resistance	UNKNOWN
storage_temperature_c	UNKNOWN
uv_resistance	UNKNOWN

Interfaces & connectors

battery_terminal_type	screw terminal, 35 mm2 / AWG2
bluetooth	built-in Bluetooth, used with the VictronConnect app; enabled by default and can be disabled from VictronConnect disputed
can	VE.Can, 2 x RJ45
cloud_api	UNKNOWN
ethernet	UNKNOWN
load_output	False
local_api	UNKNOWN
modbus_rtu	UNKNOWN
modbus_tcp	UNKNOWN
programmable_relay	True
protocol_notes	Datasheet 'Data communication port: VE.Direct and VE.Can'. Bridging to a VE.Bus inverter/charger normally requires a GX device.
pv_connector_type	screw terminal (Tr version), 35 mm2 / AWG2; MC4 variants of this family use 3 pairs of MC4 connectors disputed
relay_outputs	1 programmable relay, DPST — AC rating 240 VAC / 4 A; DC rating 4 A up to 35 VDC, 1 A up to 60 VDC (terminals labelled NO / C / NC) disputed BlueSolar / SmartSolar charge controller MPPT 250/70, 150/100 & 250/100 VE.Can — Datasheet — spec row 'Programmable relay: DPST AC rating: 240VAC / 4A DC rating: 4A up to 35VDC, 1A up to 60VDC'
remote_on_off	yes, 2-pole connector (terminals labelled H / L) disputed
rs232	UNKNOWN
rs485	UNKNOWN
usb	UNKNOWN
ve_can	Yes - 2 x paralleled RJ45 VE.Can ports
ve_direct	1 x VE.Direct port disputed
wifi	UNKNOWN

Controls & display

audible_alarm	UNKNOWN
buttons	UNKNOWN
display_type	none built-in; a removable cover on the top face accepts the optional SmartSolar Control or MPPT Control display
leds	3 status LEDs labelled Bulk / Absorption / Float
local_display	False
mobile_app	VictronConnect
remote_display_option	SmartSolar Control display / MPPT Control display
status_indicators	binary LED code also indicates the rotary-switch position (manual)
touchscreen	False
web_interface	UNKNOWN

Protection

integrated_breakers_fuses	UNKNOWN
integrated_dc_switch	UNKNOWN
over_current	UNKNOWN
over_temperature	Over temperature (output derating above 40 C) disputed
over_voltage	UNKNOWN
overvoltage_category	UNKNOWN
protection_class	UNKNOWN
pv_reverse_polarity	Yes
reverse_polarity	PV reverse polarity protection and PV reverse current protection
short_circuit	Output short circuit
under_voltage	UNKNOWN

Certifications

emc	['FCC Rules Part 15 (Class A digital device)', 'ICES-003 (Canada), Class A digital apparatus', 'RSS of Industry Canada']
grid_codes	[]
other	[]
regional	['CE', 'RCM (Australian Regulatory Compliance Mark shown on the product label in the official product photograph)']
safety	['EN/IEC 62109-1', 'UL 1741', 'CSA C22.2']
standards	['EN/IEC 62109-1', 'UL 1741', 'CSA C22.2 NO.107.1-16']

Warranty & service

conditions	UNKNOWN
design_life_years	UNKNOWN
extended_options_years	UNKNOWN
field_replaceable_parts	UNKNOWN
service_intervals	UNKNOWN
standard_years	UNKNOWN
summary	UNKNOWN (the VE.Can product page shows a warranty badge but no quotable term was returned)

Packaging & logistics

gross_weight_kg	UNKNOWN
package_depth_mm	UNKNOWN
package_height_mm	UNKNOWN
package_width_mm	UNKNOWN
transport_restrictions	UNKNOWN
units_per_pallet	UNKNOWN

Documents

datasheet BlueSolar / SmartSolar charge controller MPPT 250/70, 150/100 & 250/100 VE.Can — Datasheet rev UNKNOWN

datasheet SmartSolar Charge Controllers with VE.Can interface — MPPT 150/70 up to 150/100 VE.Can — datasheet

dimensional-drawing Dimension drawing — SmartSolar MPPT Tr VE.Can (XL)

product-page SmartSolar MPPT 150/70 up to 250/100 VE.Can — official product page

user-manual MPPT solar charger manual — SmartSolar MPPT 150/70 up to 250/100 VE.Can rev UNKNOWN

user-manual SmartSolar MPPT 150/70 up to 250/100 VE.Can — HTML manual, Technical specifications page