Sungrow SG110CX-P2
Official manufacturer GL (grid-code list includes AS/NZS 4777.2:2020) verified Sept. 3, 2026
Identity
| category | inverters |
| ean | UNKNOWN |
| generation | CX-P2 |
| grid_type | TN / TT |
| hardware_revision | UNKNOWN |
| legacy_name | UNKNOWN |
| manufacturer | Sungrow |
| manufacturer_legal_entity | Sungrow Power Supply Co., Ltd. |
| market_version | UNKNOWN |
| model | SG110CX-P2 |
| mpn | UNKNOWN |
| order_code | UNKNOWN |
| phase_configuration | three-phase (3 / N / PE) |
| product_family | SG100/110CX-P2 (CX-P2 commercial multi-MPPT string inverter, 1000 Vdc system) |
| product_status | active |
| product_status_detail | active - datasheet Version 4 carries a 2026 copyright and is hosted on Sungrow's own info-support domain; not separately listed on the global 2026 index page, which shows SG125CX-P2 / SG125CX-P3 / SG150CX in this class |
| product_status_evidence | datasheet fetched 2026-09-03; official product index fetched 2026-09-03 |
| region | GL (grid-code list includes AS/NZS 4777.2:2020) |
| release_year | UNKNOWN |
| sku | UNKNOWN |
| subcategory | grid-tied PV string inverter (three-phase commercial, no battery interface) |
| topology | transformerless (no galvanic isolation) |
| variant_note | Successor to the 1st-generation SG110CX (9 MPPT, 26 A/MPPT, 1100 V, 250 V startup, MC4). The P2 has 12 MPPTs, 30 A/MPPT, 180 V startup and Evo2 connectors - never collapse the two. |
Electrical
| dc_ac_ratio | UNKNOWN |
| european_efficiency_pct | 98.3 |
| grid_frequency_range | 45 Hz - 55 Hz (the 60 Hz band was not returned by the extraction) |
| max_ac_power_w | 110000 |
| max_apparent_power_va | 110000 |
| max_connector_current_a | 30 |
| max_dc_short_circuit_current_total_a | 600 |
| max_dc_voltage_v | 1100 |
| max_efficiency_pct | 98.5 |
| max_input_current_per_input_a | UNKNOWN |
| max_input_current_per_mppt_a | 30 |
| max_input_current_total_a | 360 |
| max_output_current_a | 158.8 |
| max_pv_input_power_w | UNKNOWN |
| max_short_circuit_current_per_mppt_a | 50 |
| max_vs_rated_current_note | max. and rated AC output current are the same figure because max. apparent power equals rated power for this model (110000 VA = 110000 W); 158.8 A checks out as 110000 / (sqrt3 x 400 V) |
| min_operating_voltage_v | 180 |
| mppt_voltage_max_v | 1000 |
| mppt_voltage_min_v | 180 |
| mppt_voltage_range_for_nominal_power | UNKNOWN |
| night_power_consumption | < 5 W |
| nominal_dc_voltage_v | 600 |
| nominal_frequency | 50 Hz / 60 Hz |
| nominal_voltage | 3 / N / PE, 230 V / 400 V |
| num_mppt | 12 |
| num_pv_inputs | 24 |
| oversizing_guidance | UNKNOWN |
| power_factor_range | > 0.99 default; 0.8 leading - 0.8 lagging |
| rated_ac_power_w | 110000 |
| rated_output_current_a | 158.8 |
| recommended_pv_power_w | UNKNOWN |
| startup_voltage_v | 200 |
| string_rules | 12 independent MPPTs, 2 PV strings per MPPT (24 strings total); max. current for DC connector 30 A |
| strings_per_mppt | 2 |
| thd | < 3 % |
| voltage_range | 320 V - 480 V |
Physical / mechanical
| cooling | smart forced air cooling |
| dimensions_mm | 1020 (W) * 795 (H) * 360 (D) mm |
| enclosure_material | UNKNOWN |
| mounting_type | ['wall-mounting bracket'] |
| weight_kg | 93 |
Installation
| ac_cable_outer_diameter_mm | 30 - 60 |
| ac_connector | OT / DT terminal (max. 240 mm2) |
| dc_connector | MC4-Evo2 (max. 6 mm2) |
| indoor_outdoor | outdoor (IP66) |
| max_installation_altitude_m | 4000 |
| mounting_orientation | UNKNOWN |
Environment
| cooling | smart forced air cooling |
| corrosion_class | C5 |
| fan_replaceable | UNKNOWN |
| ip_rating | IP66 |
| max_altitude_m | 4000 |
| night_power_consumption | < 5 W |
| noise_db | UNKNOWN |
| operating_temperature | -30 C to 60 C |
| relative_humidity | 0 % - 100 % non-condensing |
Interfaces & connectors
| bluetooth | yes (Bluetooth + APP commissioning) |
| can | none documented |
| communication_label | RS485 / WLAN (optional) / Ethernet (optional) |
| display | LED, Bluetooth + APP |
| ethernet | optional |
| isolarcloud_dependency | iSolarCloud for monitoring; no local-operation dependency stated |
| local_communication | RS485 |
| logger_support | UNKNOWN |
| modbus_rtu | UNKNOWN |
| modbus_tcp | UNKNOWN |
| register_map_availability | UNKNOWN |
| rs485 | yes |
| wifi | optional (WLAN) |
| winet_support | yes - Compatibility List 4.3 lists WiNet-S/S2 for the SGxxCX/CX-P2 models (max. 1 device) |
Protection
| afci | yes - AFCI 2.0 |
| anti_islanding | yes |
| dc_reverse_polarity | yes |
| dc_switch | yes |
| grid_protection | grid monitoring |
| insulation_monitoring | ground fault monitoring yes; PV string current monitoring yes |
| pid | PID recovery function yes |
| protective_class | Class I |
| rcmu | leakage current protection yes |
| spd | DC Type I + II / AC Type II |
Certifications
| country_of_manufacture | China |
| grid_codes | ['IEC 62109', 'IEC 61727', 'IEC 62116', 'IEC 60068', 'IEC 61683', 'IEC 61000-6-3', 'AS/NZS 4777.2:2020', 'IEC 63027'] |
Warranty & service
| extension_options | UNKNOWN |
| note | no warranty statement appears in the fetched datasheet extraction |
| standard_warranty | UNKNOWN |
Documents
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| identity.product_status | active - datasheet Version 4 carries a 2026 copyright and is hosted on Sungrow's own info-support domain; not separately listed on the global 2026 index page, which shows SG125CX-P2 / SG125CX-P3 / SG150CX in this class |
| manufacturer_legal_entity_as_printed | Sungrow Power Supply Co., Ltd. |