Sungrow SH10RS
Official manufacturer AU (fetched datasheet is the EN(AU) edition) verified Sept. 3, 2026
Unresolved safety-relevant conflict
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Identity
| category | inverters |
| ean | UNKNOWN |
| generation | SH-RS high-power (4 MPPT) |
| grid_type | UNKNOWN |
| hardware_revision | UNKNOWN |
| legacy_name | UNKNOWN |
| manufacturer | Sungrow |
| market_version | AU edition |
| model | SH10RS |
| mpn | UNKNOWN |
| order_code | UNKNOWN |
| phase_configuration | single-phase |
| product_family | SH-RS (1-phase residential hybrid, 8-10 kW) |
| product_status | UNKNOWN |
| product_status_evidence | Model still listed on Sungrow's official product pages / current datasheets as of 2026-09-03; no explicit lifecycle statement was located. |
| region | AU (fetched datasheet is the EN(AU) edition) |
| release_year | UNKNOWN |
| sku | UNKNOWN |
| subcategory | residential hybrid / storage inverter |
| topology | Transformerless (solar) / Transformerless (battery) |
| variant_note | Physically distinct from SH3.0-6.0RS: 4 MPPTs, 605x435x181 mm, 29 kg, built-in 63 A backup bypass, AFCI. The fetched datasheet is the EN(AU) edition; an IEC/EU edition may print a different rated AC output power (9999 W is an AS/NZS-driven figure). |
Electrical
| dc_ac_ratio | 2.0 |
| european_efficiency_pct | 97.1 |
| feed_in_phases_connection_phases | 1 / 1-N-PE |
| frequency_range | 45 Hz - 55 Hz / 55 Hz - 65 Hz |
| max_ac_power_from_grid_w | 9999 |
| max_ac_power_w | 9999 |
| max_apparent_power_va | 9999 |
| max_dc_voltage_v | 600 |
| max_efficiency_pct | 97.5 |
| max_input_current_per_input_a | 16 |
| max_input_current_per_mppt_a | 16 |
| max_output_current_a | 45.5 |
| max_pv_input_current_total_a | 64 |
| max_pv_input_power_w | UNKNOWN |
| max_short_circuit_current_per_mppt_a | 20 |
| max_short_circuit_current_total_a | 80 |
| min_pv_input_voltage_v | 40 |
| mppt_voltage_max_v | 560 |
| mppt_voltage_min_v | 40 |
| nominal_dc_voltage_v | 360 |
| nominal_frequency | 50 Hz / 60 Hz |
| nominal_voltage | 220 V / 230 V / 240 V |
| num_mppt | 4 |
| num_pv_inputs | 4 |
| oversizing_guidance | Product page states 'Up to 200 percent PV input capacity'; datasheet recommended max PV input power 20000 Wp |
| power_factor_range | > 0.99 at rated power / adjustable 0.8 leading to 0.8 lagging |
| rated_ac_power_w | 9999 |
| recommended_pv_power_w | 20000 |
| startup_voltage_v | 50 |
| string_rules | No. of PV strings per MPPT: 1 / 1 / 1 / 1 (one string on each of four MPPTs) |
| thd | < 3 % (of rated power) |
| voltage_range | 154 V - 276 V |
Physical / mechanical
| cooling | Natural cooling |
| dimensions | 605 mm * 435 mm * 181 mm (W * H * D) |
| display | LED digital display and LED indicator |
| ip_rating | IP65 (product page states IP65/C5) |
| mounting | Wall-mounting bracket |
| noise_db | 45 dB (A) typical |
| weight_kg | 29 |
Installation
| ac_connection_type | Plug and play connector |
| dc_connection_type | MC4 (PV) / Plug and play connector (battery) |
Environment
| max_altitude_m | 4000 |
| operating_temperature | -25 C - 60 C |
| relative_humidity | 0 % - 100 % (non-condensing) |
Interfaces & connectors
| can | True |
| di_do | DI x 1 / DO x 2 / DRM |
| ethernet | True |
| isolarcloud_dependency | UNKNOWN |
| local_communication | RS485, WLAN, Ethernet, CAN; DI x 1 / DO x 2 / DRM |
| logger_support | EyeM4 (named in user manual scope of delivery) |
| modbus_rtu | RS485_2 (A3, B3) documented for EV charger communication via RS485 protocol |
| modbus_tcp | UNKNOWN |
| register_map_availability | Communication Protocol of Residential and Small Industrial Hybrid Inverter (located on product page, not fetched) |
| rs485 | True |
| wifi | Yes (WLAN, via WiNet-S2) |
| winet_support | WiNet-S2 (named in user manual scope of delivery) |
Protection
| afci | Yes ('Support precise AFCI' on product page; datasheet AFCI row = Yes) |
| anti_islanding | UNKNOWN |
| battery_reverse_polarity | True |
| dc_reverse_polarity | True |
| dc_switch | DC switch (solar): Yes |
| grid_protection | Grid monitoring: Yes |
| insulation_monitoring | UNKNOWN |
| iv_scan_and_diagnosis | True |
| pid_zero | True |
| rcmu | Leakage current protection: Yes |
| spd | DC type II / AC type II |
Certifications
| country_of_manufacture | China |
| standards_and_grid_codes | IEC 62109-1:2010, IEC 62109-2, IEC 62477-1, IEC 61000-6-1/-2/-3/-4, IEC 62920, EN 55011, CISPR 11, AS/NZS 4777.2:2020 |
Warranty & service
| warranty_note | No warranty row was present in any fetched datasheet. |
| warranty_years | UNKNOWN |
Documents
user_manual
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
User Manual 1-phase Hybrid Inverter SH8.0RS/SH10RS (Ver16) — located, not retrieved
rev SH8.0-10RS-UEN-Ver16-202512
Recorded conflicts
electrical.max_ac_power_from_grid_w Review required
9999 W (equal to rated AC output power) — SH8.0~10RS Datasheet V3 EN(AU) - PDF text extraction
UNRESOLVED - the row may be mis-aligned in text extraction — self-check
electrical.rated_ac_power_w Review required
9999 W — SH8.0~10RS Datasheet V3 EN(AU)
10 kW (marketed / product-page naming 'SH8.0/10RS ... 10kW') — Sungrow product page SH8.0/10RS
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Built-in bypass | Built-in 63A bypass |
| Country of manufacture | China |
| DI / DO | DI x 1 / DO x 2 / DRM |
| IV scan and diagnosis | Yes |
| PV input capacity | Up to 200% PV input capacity |
| documented_relationship:compatible_battery | {"to_manufacturer": "Sungrow", "to_model": "SBR096 / SBR128 / SBR160 / SBR192", "relationship_type": "compatible_battery", "match_level": "series", "communication_protocol": "CAN (BMS)", "required_firmware": "SBRBCU-S_22011.01.05 or later", "required_settings": "UNKNOWN", "required_accessories": "UNKNOWN", "region": "Global", "source": "SH8.0-10RS User Manual Ver14", "source_url": "https://info-support.sungrowpower.com/application/pdf/2024/08/15/SH8.0-10RS-UEN-Ver14-202405.pdf", "source_page": "Compatible battery table", "confidence": "officially-verified", "status": "COMPATIBLE", "notes": ""} |
| manufacturer_legal_entity_as_printed | Sungrow Power Supply Co., Ltd. |