Sungrow SH10RT
Official manufacturer AU / IEC (values below from the EN(AU) V15 datasheet unless noted) verified Sept. 3, 2026
Unresolved safety-relevant conflict
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Identity
| category | inverters |
| ean | UNKNOWN |
| generation | SH-RT 1st generation |
| grid_type | 3 / N / PE |
| hardware_revision | UNKNOWN |
| legacy_name | UNKNOWN |
| manufacturer | Sungrow |
| market_version | Base (non -20) |
| model | SH10RT |
| mpn | UNKNOWN |
| order_code | UNKNOWN |
| phase_configuration | three-phase |
| product_family | SH-RT (3-phase residential hybrid) |
| product_status | UNKNOWN |
| product_status_evidence | Model still listed on Sungrow's official product pages / current datasheets as of 2026-09-03; no explicit lifecycle statement was located. |
| region | AU / IEC (values below from the EN(AU) V15 datasheet unless noted) |
| release_year | UNKNOWN |
| sku | UNKNOWN |
| subcategory | residential hybrid / storage inverter |
| topology | Transformerless (solar) / Transformerless (battery) |
| variant_note | DISTINCT from SH10RT-20. The -20 hardware raises per-string DC current from 12.5 A to 13.5 A and widens the MPP window; it also pairs with a different meter (DTSU666-20 vs DTSU666). Nothing has been carried across. |
Electrical
| dc_ac_ratio | 1.5 |
| european_efficiency_pct | 97.9 |
| feed_in_phases_connection_phases | 3 / 3 |
| frequency_range | 45 Hz - 55 Hz |
| max_ac_power_from_grid_w | 20600 |
| max_ac_power_w | 9999 |
| max_apparent_power_va | 9999 |
| max_dc_voltage_v | 1000 |
| max_efficiency_pct | 98.4 |
| max_input_current_per_input_a | 12.5 |
| max_input_current_per_mppt_a | 37.5 A (12.5 A / 25 A) |
| max_output_current_a | 15.2 |
| max_pv_input_power_w | UNKNOWN |
| max_short_circuit_current_per_input_a | 18 |
| max_short_circuit_current_per_mppt_a | 54 A (18 A / 36 A) |
| mppt_voltage_max_v | 950 |
| mppt_voltage_min_v | 200 |
| mppt_voltage_range | 200 V - 950 V |
| mppt_voltage_range_for_nominal_power | 280 V - 850 V |
| nominal_dc_voltage_v | 600 |
| nominal_frequency | 50 Hz |
| nominal_voltage | 3 / N / PE, 220 V / 380 V; 230 V / 400 V |
| num_mppt | 2 |
| num_pv_inputs | 3 |
| oversizing_guidance | Recommended max. PV input power 15000 Wp |
| power_factor_range | > 0.99 at rated power / adjustable 0.8 leading to 0.8 lagging |
| pv_to_battery_to_grid_efficiency | > 94 % |
| rated_ac_power_w | 9999 |
| recommended_pv_power_w | 15000 |
| startup_voltage_v | 200 V / 250 V |
| string_rules | No. of strings per MPP input = 1 / 2 |
| thd | < 3 % (of rated power) |
| voltage_range | 270 V - 480 V |
Physical / mechanical
| cooling | Natural convection |
| dimensions | 460 mm * 540 mm * 170 mm (W * H * D) |
| display | LED |
| ip_rating | IP65 |
| mounting | Wall-mounting bracket |
| noise_db | 30 dB (A) |
| weight_kg | 27 |
Installation
| ac_connection_type | Plug and play connector |
| dc_connection_type | MC4 (PV) / Evo2 compatible (Battery) |
Environment
| max_altitude_m | 4000 |
| operating_temperature | -25 C - 60 C |
| relative_humidity | 0 % - 100 % (non-condensing) |
Interfaces & connectors
| can | True |
| di_do | DI * 4 / DO * 1 / DRM |
| ethernet | True |
| isolarcloud_dependency | UNKNOWN |
| local_communication | RS485, WLAN, Ethernet, CAN, 4 x DI, 1 x DO |
| logger_support | UNKNOWN |
| modbus_rtu | UNKNOWN |
| modbus_tcp | UNKNOWN |
| register_map_availability | Communication Protocol of Residential and Small Industrial Hybrid Inverter (located on product page, not fetched) |
| rs485 | True |
| wifi | Yes (WLAN, via WiNet-S / WiNet-S2) |
| winet_support | WiNet-S / WiNet-S2 |
Protection
| afci | Not mentioned in the fetched datasheet or user manual |
| anti_islanding | UNKNOWN |
| dc_overcurrent_protection_battery | True |
| dc_reverse_polarity | True |
| dc_switch | DC switch (solar): Yes |
| grid_protection | Grid monitoring: Yes |
| insulation_monitoring | UNKNOWN |
| pid_recovery | True |
| rcmu | Leakage current protection: Yes |
| spd | DC Type II / AC Type II |
Certifications
| country_of_manufacture | China |
| standards_and_grid_codes | IEC / EN 62109, IEC / EN 61000-6, EN 62477-1, IEC 61727, IEC 62116, IEC 61683, VDE-AR-N-4105, AS/NZS 4777.2, EN 50549-1, NRS 097-2-1, TOR Generator Type A |
Warranty & service
| warranty_note | No warranty row was present in any fetched datasheet. |
| warranty_years | UNKNOWN |
Documents
communication_protocol
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Communication Protocol of Residential and Small Industrial Hybrid Inverter — located, not retrieved
rev UNKNOWN
user_manual
User Manual 3-Phase Hybrid Inverter SH5.0RT/SH6.0RT/SH8.0RT/SH10RT/SH5.0RT-20/SH6.0RT-20/SH8.0RT-20/SH10RT-20
rev SH5.0-10RT&SH5.0-10RT-20-UEN-Ver24-202503
Recorded conflicts
electrical.rated_ac_power_w Review required
9999 W — SH5.0/10RT Datasheet V15 EN(AU)
10000 W — SH5.0/6.0/8.0/10RT Datasheet V1.2.1 (uk.sungrowpower.com, IEC/UK edition)
parallel.max_parallel_units Review required
5 (row 'Parallel operation on grid port / Max. No of inverters' = 'Master-slave mode / 5') — SH5.0/10RT Datasheet V15 EN(AU) and SH5.0-10RT Datasheet V1.2.1 (uk.sungrowpower.com)
2 ('Maximum two hybrid inverters with the same type can be connected in parallel') — SH5.0-10RT&SH5.0-10RT-20 User Manual Ver24-202503
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| MPP voltage range for nominal power | 280 V - 850 V |
| Max. AC power from grid | 20600 W |
| PV to Bat to Grid efficiency | > 94 % |
| Rated output current for backup load | 3 * 18.5 A |
| documented_relationship:compatible_battery | {"to_manufacturer": "Sungrow", "to_model": "SBR096 / SBR128 / SBR160 / SBR192 / SBR224 / SBR256", "relationship_type": "compatible_battery", "match_level": "series", "communication_protocol": "CAN (BMS)", "required_firmware": "SBRBCU-S_22011.01.16 or later per manual battery table", "required_settings": "UNKNOWN", "required_accessories": "UNKNOWN", "region": "Global", "source": "SH5.0-10RT&SH5.0-10RT-20 User Manual Ver24", "source_url": "https://info-support.sungrowpower.com/application/pdf/2025/07/17/SHRT%20User%20Manual.pdf", "source_page": "Compatible battery table", "confidence": "officially-verified", "status": "COMPATIBLE", "notes": "Listed as a series row in the manual; kept at series match_level."} |
| manufacturer_legal_entity_as_printed | Sungrow Power Supply Co., Ltd. |