BYD Battery-Box Premium HVM 11.0
Official manufacturer EU/global verified Sept. 1, 2026
UNKNOWN
Identity
| category | batteries |
| ean | UNKNOWN |
| generation | Premium (2nd generation Battery-Box) |
| manufacturer | BYD |
| market_version | EN datasheet V1.4 (2024-12-12) |
| model | Battery-Box Premium HVM 11.0 |
| mpn | UNKNOWN |
| product_family | Battery-Box Premium HVM 8.3 / 11.0 / 13.8 / 16.6 / 19.3 / 22.1 |
| product_revision | UNKNOWN |
| product_status | active |
| region | EU/global |
| release_year | UNKNOWN |
| sku | UNKNOWN |
Electrical
| chemistry | LFP (LiFePO4, cobalt-free) |
| communication_can | True |
| communication_rs485 | True |
| firmware_requirements |
Per BYD Compatible Inverter List V2.21 (2025-08-20) the HVM column gives minimum BMU/BMS firmware per inverter, e.g. Fronius Symo GEN24 Plus 3.14/3.20; Fronius Primo GEN24 Plus 3.15/3.21; Fronius Verto Plus 3.26/3.31; SMA STP 5.0-10.0 SE 3.16/3.24; SMA Sunny Boy Smart Energy 3.23/3.28; KOSTAL Plenticore Plus 3.0 G2 and Plenticore G3 3.13/3.19; KOSTAL PIKO BA 3.16/3.24; Sungrow SH-RT 3.13/3.19; Sungrow SH-RS 3.16/3.24; GoodWe ET 5-10kW/BT 3.13,3.19 (inverter ARM 11); GoodWe EHB 3.26; GoodWe ET 15-30kW 3.20,3.27 (inverter ARM 09, DSP 08); Solis S6-EH3P(3-10)K/K2 3.20,3.26 (inverter V01-1B); Deye SUN-(5-20)K-SG01HP3-EU-AM2 3.19,3.26 (inverter 2001-C016); Deye SUN-50K-SG01HP3-EU-BM4 3.24,3.29 (inverter C032-1077+). Document instruction: "Always install the latest firmware on the Battery-Box!"
BYD BATTERY-BOX PREMIUM HVS&HVM COMPATIBLE INVERTER LIST V2.21 — HVM BMU/BMS firmware column, per inverter row
|
| max_continuous_charge_current_a | 50 |
| max_continuous_discharge_current_a | 50 |
| max_continuous_power_kw | UNKNOWN (datasheet states current, not a kW figure) |
| max_parallel_units | 3 |
| max_series_units | 8 |
| min_series_units_hv | 3 |
| nominal_energy_kwh | 11.04 |
| nominal_voltage_v |
204.8
BATTERY-BOX PREMIUM HVM Datasheet V1.4 EN — spec table, 'Nominal Voltage' row, HVM 11.0 column = 204.8 V
|
| officially_supported_inverter_brands | ['Fronius', 'SMA', 'KOSTAL', 'SUNGROW', 'GoodWe', 'Solis', 'Deye', 'Ingeteam', 'KACO', 'Solplanet', 'GE', 'Canadian Solar', 'Hoymiles', 'Afore'] |
| officially_supported_inverter_models | ['Fronius Symo Hybrid (single tower 3-8 modules)', 'Fronius Symo GEN24 Plus (single tower 2-5; parallel 4-8)', 'Fronius Primo GEN24 Plus (single tower 2-3; parallel 4-7)', 'Fronius Verto Plus (single tower 2-5; parallel 4-8)', 'SMA Sunny Boy Storage 2.5 (2-4, no parallel)', 'SMA Sunny Boy Storage 3.7/5.0/6.0 (2-4; 3-8 parallel)', 'SMA STP 5.0-10.0 SE (2-5; 4-8)', 'SMA Sunny Boy Smart Energy 3.6/4.0/5.0/6.0 (2-4; 3-8)', 'KOSTAL Plenticore Plus 3.0 (G2) (2-5; 4)', 'KOSTAL Plenticore Plus 4.2/5.5/7.0/8.5/10.0 (G2) (2-5; 4-8)', 'KOSTAL Plenticore BI 5.5-13 and BI xx/26 (G2) (2-5; 5-8)', 'KOSTAL Piko MP Plus 1.5-1/2.0-1/2.5-1 (2-3; 3-4)', 'KOSTAL Piko MP Plus 3.0-1/3.0-2/3.6-1/3.6-2/4.6-2/5.0-2 (2-5; 3-8)', 'KOSTAL PIKO 6.0/8.0/10 BA (2-4; 4-8)', 'KOSTAL Plenticore G3 (2-5; 3-8)', 'SUNGROW SH5.0/6.0/8.0/10RT (2-5; 4-8)', 'SUNGROW SH3.0/3.6/4.0/5.0/6.0RS (2-4; 3-8)', 'GoodWe ET (5-10 kW)/BT (2-5; 4-8)', 'GoodWe EH/BH (2-4; 3-8)', 'GoodWe EHB (2-4; 3-8)', 'GoodWe ET (15-30 kW) (2-5; 4-8)', 'Solis RHI-3P(5-10)K-HVES-5G (2-5; 4-8)', 'Solis S6-EH3P(3-10)K-H-EU and S6-EH3P(3-10)K2-H (2-5; 3-8)', 'Solis S6-EH3P(12-20)K-H (2-5; 3-8)', 'Solis S6-EH3P(29.9-50)K-H (2-5; 4-8)', 'Deye SUN-(5-20)K-SG01HP3-EU-AM2 (2-5; 4-8)', 'Deye SUN-50K-SG01HP3-EU-BM4 (2-5; 4-8)', 'Ingeteam ISS 1Play 3TL M / 6TL M (2-4; 3-8)', 'KACO Blueplanet hybrid 6.0-10.0 TL3; 6.0-12.0 NH3 M2; 8.0-12.0 NH3 M3', 'Solplanet ASW H-T2 Series; ASW H-T3 Series', 'GE GEH 5.0/8.6/10-1U-10', 'Canadian Solar CSI-TE / CSI-HE / CSI-BHE Series', 'Hoymiles HYT-HV-EUG1 / HYT-HV-AUG1 / HAT-HV-EUG1 Series', 'Afore AF(3-20)K-TH; AF25K-TH/AF30K-TH'] |
| peak_current_a |
75 (3 s)
BATTERY-BOX PREMIUM HVM Datasheet V1.4 EN — spec table, 'Peak Current' = 75 A, 3 s
|
| supported_inverter_protocols | ['CAN', 'RS485'] |
| usable_energy_kwh | 11.04 |
| voltage_class | HV |
| voltage_range_v |
160-236 (HVM 11.0 / 4 modules). Family per stack size: HVM 8.3 (3 mod) 120-177; HVM 11.0 (4) 160-236; HVM 13.8 (5) 200-295; HVM 16.6 (6) 240-354; HVM 19.3 (7) 280-413; HVM 22.1 (8) 320-472
BATTERY-BOX PREMIUM HVM Datasheet V1.4 EN — spec table, 'Operating Voltage' row, HVM 11.0 column
|
Physical / mechanical
| cable_entry_positions | UNKNOWN |
| depth_mm | 298 |
| enclosure_material | UNKNOWN |
| height_mm | 1228 |
| housing_color | UNKNOWN |
| module_energy_kwh | 2.76 |
| module_nominal_voltage_v | 51.2 |
| module_weight_kg | 38 |
| mounting_bolt_size | UNKNOWN (wall bracket bolts torqued to 8 N.m per operating manual) |
| mounting_type | ['floor'] |
| shipping_weight_kg | UNKNOWN |
| stack_dimensions_by_size_mm | HVM 8.3 995x585x298; HVM 11.0 1228x585x298; HVM 13.8 1461x585x298; HVM 16.6 1694x585x298; HVM 19.3 1927x585x298; HVM 22.1 2160x585x298 (HxWxD) |
| stack_weight_by_size_kg | HVM 8.3 119-129; HVM 11.0 153-167; HVM 13.8 188-205; HVM 16.6 222-243; HVM 19.3 257-281; HVM 22.1 291-319 |
| terminal_locations | power terminals on the BCU (Battery Control Unit) at the top of the tower |
| torque_specs |
BCU hanger 5.5 N.m; module connections 2 N.m; wall bracket bolts 8 N.m; grounding 4 N.m (Battery-Box Premium HVS/HVM Operating Manual)
Battery-Box Premium HVS/HVM Operating Manual V1.0 — installation section, torque table
|
| weight_kg | 153-167 (HVM 11.0 range as printed) |
| width_mm | 585 |
Installation
| clearance_bottom_mm | UNKNOWN |
| clearance_left_mm | UNKNOWN |
| clearance_rear_mm | 12-19 (gap between the wall and the base, per operating manual) |
| clearance_right_mm | UNKNOWN |
| clearance_top_mm | UNKNOWN |
| indoor_outdoor | indoor and outdoor use (IP55) |
| installation_humidity_range | 5-95 % ambient |
| installation_temperature_range_c | -10 to +50 ambient |
| max_installation_altitude_m | 3000 |
| maximum_modules_per_tower | 8 |
| maximum_towers_in_parallel |
3
Battery-Box Premium HVS/HVM Operating Manual V1.0 — 'Up to maximum three battery systems could be connected in parallel'
|
| minimum_modules_per_tower |
3
Battery-Box Premium HVS/HVM Operating Manual V1.0 — 'Three to eight HVM battery modules could be installed in one tower'
|
| mounting_orientation | upright, floor-standing tower secured to a wall bracket |
| orientation_allowed | ['vertical/upright floor-standing'] |
| orientation_forbidden | UNKNOWN |
| parallel_rules | "Up to maximum three battery systems could be connected in parallel. BUT THE HVS SYSTEM CANNOT BE CONNECTED WITH THE HVM SYSTEM." (operating manual). Compatible Inverter List V2.21 adds: "Every tower connected in parallel requires the same module quantity" and "Parallel connection is not possible for Fronius inverters in the configuration: 3 x HVM 22.1" |
| surface_requirements | solid floor able to carry 153-167 kg (HVM 11.0) up to 319 kg (HVM 22.1); wall bracket required |
| two_person_lift_required | UNKNOWN (38 kg per module) |
Environment
| charge_temperature_c | -10 to +50 with derating -10 to +5 |
| cooling_method | natural convection (no fan documented) |
| discharge_temperature_c | -10 to +50 |
| ik_rating | UNKNOWN |
| ip_rating | IP55 |
| max_altitude_m | 3000 |
| nema_rating | UNKNOWN |
| noise_level_db | UNKNOWN |
| operating_temperature_c | -10 to +50 (charge derating between -10 and +5 per operating manual) |
| relative_humidity | 5-95 % |
| round_trip_efficiency | >= 96 % |
| storage_soc | 30% <= SOC <= 60% recommended for long-term storage |
| storage_temperature_c | -10 to +25 optimal; above +50 not allowed |
Interfaces & connectors
| battery_terminal_type | screw terminals on BCU; conductor cross-section up to 16 mm2, cable outer diameter 4-9 mm, insulation stripping 16-18 mm |
| bluetooth | UNKNOWN |
| can | yes (CAN to inverter, 8-pin terminal block on BCU) |
| digital_inputs | UNKNOWN |
| dry_contacts | UNKNOWN |
| ethernet | UNKNOWN |
| modbus_rtu | UNKNOWN |
| modbus_tcp | UNKNOWN |
| protocol_notes | 8-pin terminal block pinout: 1-2 CAN H / RS485 A; 3-4 CAN L / RS485 B; 5-6 Ground; 7-8 12 V supply. Communication cable Cat5/Cat5e or higher, max length 10 m (operating manual) |
| rs485 | yes (RS485 A/B on the same 8-pin terminal block) |
| usb | UNKNOWN |
| wifi | UNKNOWN |
Controls & display
| audible_alarm | UNKNOWN |
| buttons | 1 power button with integrated LED (press 5 s to power off) |
| display_type | none (LED button only) |
| leds | single white/blue LED in the power button; white glow = idle, slow white flash = charging, fast white flash = discharging, white flash + blue glow = SOC < 15% discharging, white+blue flash = error |
| local_display | False |
| mobile_app | Be Connect / Be Connect Plus (BYD service app) |
| status_indicators | blue LED flash count encodes error codes 1-14 |
| touchscreen | False |
Protection
| fire_guidance | "ABC or carbon dioxide extinguisher is nearby. Water cannot be used to extinguish the fire" (operating manual) |
| integrated_breakers_fuses | DC air switch integrated in the BCU |
| integrated_dc_switch | True |
| over_current | yes (peak output limited to 75 A / 5 s per operating manual for HVM) |
| over_temperature | yes (operating window enforced, charge derating -10 to +5 C) |
| over_voltage | yes (BMS) |
| safety_interlock | "The battery system cannot be turned on when the Operating Panel is removed" |
| short_circuit | yes (DC air switch integrated in the BCU) |
| thermal_runaway_measures | UNKNOWN |
| under_voltage | yes (BMS) |
Certifications
| emc | [] |
| grid_codes | [] |
| other | ['UN38.3'] |
| regional | ['CE', 'CEC'] |
| safety | ['IEC62619', 'VDE2510-50'] |
Warranty & service
| conditions | UNKNOWN (BYD publishes a separate Battery-Box Premium warranty document) |
| cycle_life | UNKNOWN (not printed on datasheet V1.4) |
| design_life_years | UNKNOWN |
| extended_options_years | [] |
| field_replaceable_parts | ['battery module', 'BCU'] |
| service_intervals | UNKNOWN |
| standard_years | 10 |
| throughput_guarantee_mwh | UNKNOWN |
Packaging & logistics
| gross_weight_kg | UNKNOWN |
| package_depth_mm | UNKNOWN |
| package_height_mm | UNKNOWN |
| package_width_mm | UNKNOWN |
| transport_restrictions | UN38.3 tested; lithium battery shipment. Class 9 not explicitly printed in the fetched documents |
| units_per_pallet | UNKNOWN |
Documents
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Every tower connected in parallel requires the same module quantity | same module quantity per parallel tower |
| Gap between the wall and the base | 12~19 mm |
| HVM battery module | 2.76 kWh, 51.2 V, 38 kg |