Knowledge Base ›
Batteries
Dyness PowerBrick MAX
Official manufacturer
global (EN documentation)
verified Sept. 2, 2026
Identity
| category |
batteries
|
| ean |
UNKNOWN
|
| generation |
UNKNOWN
|
| hardware_revision |
UNKNOWN
|
| legacy_name |
UNKNOWN
|
| manufacturer |
Dyness (Jiangsu Dyness Digital Energy Technology Co., Ltd.)
|
| market_version |
UNKNOWN
|
| model |
PowerBrick MAX
|
| mpn |
UNKNOWN
|
| product_family |
PowerBrick
|
| product_status |
UNKNOWN
|
| product_status_detail |
current
|
| product_status_evidence |
Live official product page https://www.dyness.com/powerbrick-max-low-voltage-residential-battery linking datasheet DynessPowerBrickMaxDatasheeten20260520.pdf (accessed 2026-09-02)
|
| region |
global (EN documentation)
|
| release_year |
UNKNOWN
|
| sku |
UNKNOWN
|
| subcategory |
low-voltage residential lithium battery module (48V class)
|
| variant_note |
314Ah / 16.076 kWh IP20 module. Official page writes the name as "PowerBrick Max". Dimensions, weight, IP rating and electrical ratings match PowerBrick SC in every fetched source; no fetched document explains how MAX and SC differ.
|
Electrical
| cell_chemistry |
LiFePO4
|
| cell_type |
314Ah LiFePO4 cell (official page: "314Ah LiFePO4 cells")
|
| continuous_charge_current_a |
UNKNOWN
|
| continuous_discharge_current_a |
UNKNOWN
|
| continuous_power_kw |
UNKNOWN
|
| cycle_life |
8000
|
| depth_of_discharge_pct |
95
|
| max_charge_current_a |
200
|
| max_charge_power_kw |
10.24
|
| max_discharge_current_a |
200
|
| max_discharge_power_kw |
10.24
|
| max_parallel_units |
50
|
| max_series_units |
UNKNOWN
|
| nominal_capacity_ah |
314
|
| nominal_energy_kwh |
16.076
|
| nominal_voltage_v |
51.2
|
| operating_voltage_max_v |
57.6
|
| operating_voltage_min_v |
44.8
|
| parallel_supported |
True
|
| peak_charge_current_a |
UNKNOWN
|
| peak_discharge_current_a |
300
|
| peak_power_kw |
UNKNOWN
|
| round_trip_efficiency_pct |
UNKNOWN
|
| series_supported |
UNKNOWN
|
| system_energy_max_kwh |
803.8
|
| system_energy_min_kwh |
16.076
|
| usable_energy_kwh |
15.272
|
Physical / mechanical
| cooling_method |
UNKNOWN
|
| depth_mm |
235
|
| height_mm |
857
|
| installation_notes |
See data_conflicts: the official page gives depth 235 mm while the distributor spec sheet gives 233 mm.
|
| ip_rating |
IP20
|
| mounting_type |
Floor- or Wall-mounted (official page)
|
| rack_units |
UNKNOWN
|
| weight_kg |
116
|
| width_mm |
435
|
Installation
| indoor_outdoor |
indoor (IP20)
|
| notes |
Up to 50 units in parallel = 803.8 kWh system
|
| parallel_hub_required |
UNKNOWN
|
Environment
| indoor_outdoor |
indoor
|
| max_altitude_m |
UNKNOWN
|
| operating_humidity |
UNKNOWN
|
| operating_temperature_charge_max_c |
55
|
| operating_temperature_charge_min_c |
0
|
| operating_temperature_discharge_max_c |
55
|
| operating_temperature_discharge_min_c |
-20
|
| operating_temperature_max_c |
55
|
| operating_temperature_min_c |
-20
|
| storage_temperature_max_c |
UNKNOWN
|
| storage_temperature_min_c |
UNKNOWN
|
Interfaces & connectors
| bluetooth |
UNKNOWN
|
| can |
True
|
| communication_ports |
CAN / RS485
|
| dry_contact |
UNKNOWN
|
| ethernet |
UNKNOWN
|
| modbus_rtu |
UNKNOWN
|
| modbus_tcp |
UNKNOWN
|
| protocol_notes |
UNKNOWN
|
| rs232 |
UNKNOWN
|
| rs485 |
True
|
| usb |
UNKNOWN
|
| wifi |
UNKNOWN
|
Protection
| fire_suppression |
Built-in aerosol fire extinguisher (official page)
|
| notes |
UNKNOWN
|
Certifications
| safety_certifications |
IEC62619
|
| standards |
UN38.3 / IEC62619
|
| transport_certifications |
UN38.3
|
Warranty & service
| conditions |
UNKNOWN
|
| summary |
10-year warranty (official page: "314Ah LiFePO4 cells, ≥8000 cycles, 10-year warranty")
|
| years |
10
|
Documents
datasheet
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Dyness PowerBrick Max Datasheet EN 2026-05-20 (official, on dyness.com) — located, not retrieved
rev 20260520
Recorded conflicts
physical.depth_mm Review required
435×235×857 mm (W×D×H) — Dyness official PowerBrick Max product page
435 / 233 / 857 mm (W/D/H) — Solar Warehouse SA distributor spec listing
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Fast Charge / Discharge | 200A (10.24 kW per module) |
| Operating Temperature | -20°C to 55°C optional |
| Recommended C Rate | 0.45C (140 A) |
| Recommended Power | 7.168 kW |
| identity.product_status | current |
| manufacturer_legal_entity_as_printed | Jiangsu Dyness Digital Energy Technology Co., Ltd. |
Build a system with this product