Dyness Tower Pro TP19
Verified distributor global (EN documentation) verified Sept. 2, 2026
Unresolved safety-relevant conflict
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Identity
| category | batteries |
| ean | UNKNOWN |
| generation | Tower Pro (successor generation to the Tower T7-T21 series) |
| hardware_revision | UNKNOWN |
| legacy_name | UNKNOWN |
| manufacturer | Dyness (Dyness Digital Energy Technology Co., LTD) |
| market_version | EN |
| model | Tower Pro TP19 |
| mpn | UNKNOWN |
| product_family | Dyness Tower Pro (TP7 / TP11 / TP15 / TP19 / TP23, 192-576 V HV) |
| product_status | UNKNOWN |
| product_status_detail | current |
| product_status_evidence | Live official product page with full specification table at https://dyness.com/tower-pro-high-voltage-storage-battery-for-household-use (accessed 2026-09-02); an official datasheet revision dated 2025-10-30 is linked from that page. |
| region | global (EN documentation) |
| release_year | UNKNOWN |
| sku | UNKNOWN |
| subcategory | high-voltage residential stacked battery SYSTEM (Base + BDU control unit + N HV9640 modules) |
| variant_note | SYSTEM-level record. Tower Pro TP19 = 5 x HV9640 battery modules on one Base + BDU. The 19.2 kWh / 480 V figures are SYSTEM figures; the module is 96 V / 40 Ah / 3.84 kWh (see the separate HV9640 record). Tower Pro is a 1C system (max charge and discharge power in kW equals the rated energy in kWh); the older Tower series is not. |
Electrical
| cell_chemistry | LiFePO4 (manual: 'LFP' / 'Li-ion (LFP)') |
| cell_type | UNKNOWN |
| continuous_charge_current_a | 20 |
| continuous_discharge_current_a | 20 |
| continuous_power_kw | 19.2 |
| cycle_life | 8000 |
| depth_of_discharge_pct | 95 |
| max_charge_current_a | 40 |
| max_charge_power_kw | 19.2 |
| max_discharge_current_a | 40 |
| max_discharge_power_kw | 19.2 |
| max_parallel_units | 12 |
| max_series_units | 6 |
| modules_per_tower_max | 6 |
| modules_per_tower_min | 2 |
| nominal_capacity_ah | 40 |
| nominal_energy_kwh | 19.2 |
| nominal_voltage_v | 480 |
| operating_voltage_max_v | 540 |
| operating_voltage_min_v | 420 |
| parallel_supported | True |
| peak_charge_current_a | UNKNOWN |
| peak_discharge_current_a | UNKNOWN |
| peak_power_kw | UNKNOWN |
| round_trip_efficiency_pct | 95 |
| series_supported | True |
| system_energy_max_kwh | 276.48 |
| system_energy_min_kwh | 7.68 |
| usable_energy_kwh | 18.24 |
Physical / mechanical
| color | UNKNOWN |
| cooling_method | UNKNOWN |
| depth_mm | 310 |
| enclosure_material | UNKNOWN |
| height_mm | 1451 |
| installation_notes | Manual clearance diagram: 300 mm lateral clearance on each side; not in direct sunlight, rain or snow; not against flammable walls. Grounding resistance requirement quoted as '<=100 mOhm' (system) and '<1 Ohm' (installation). |
| ip_rating | IP55 |
| mounting_type | floor-standing stacked tower (BDU control module on top of N stacked HV9640 modules, on a base) |
| rack_units | UNKNOWN |
| shipping_weight_kg | UNKNOWN |
| weight_kg | 206.0 |
| width_mm | 587 |
Installation
| clearance_notes | 300 mm lateral clearance on each side (manual clearance diagram) |
| indoor_outdoor | indoor and outdoor (IP55) |
| notes | Parallel connection prerequisites (manual): same model and same capacity, inter-cluster voltage difference <20 V, all clusters at 100% SOC, additions at intervals <6 months, start Slave first and Host last. Grounding: '<=100 mOhm' system / '<1 Ohm' installation. |
| parallel_hub_required | No - clusters daisy-chain via the BDU 'Parallel 1#' and 'Parallel 2#' RJ45 ports |
Environment
| indoor_outdoor | indoor and outdoor (IP55); official page claims 'operation from -20C to 55C' |
| max_altitude_m | UNKNOWN |
| operating_humidity | UNKNOWN |
| operating_temperature_charge_max_c | 55 |
| operating_temperature_charge_min_c | 0 |
| operating_temperature_discharge_max_c | 55 |
| operating_temperature_discharge_min_c | -10 |
| operating_temperature_max_c | 55 |
| operating_temperature_min_c | -20 |
| pollution_degree | II (HV9640 module table) |
| storage_humidity | <65% RH |
| storage_temperature_max_c | 45 |
| storage_temperature_min_c | 5 |
Interfaces & connectors
| bluetooth | UNKNOWN |
| can | True |
| communication_ports | BDU: 'Parallel 1#', 'Parallel 2#' (multi-cluster RJ45), 'Inverter CAN/RS485' RJ45, WiFi antenna |
| dry_contact | UNKNOWN |
| ethernet | UNKNOWN |
| modbus_rtu | UNKNOWN |
| modbus_tcp | UNKNOWN |
| protocol_notes | Inverter CAN/RS485 RJ45 pinout (manual Table 2-8): PIN1 Orange/White 485_B, PIN2 Orange 485_A, PIN3 Green/White Reserved, PIN4 Blue CANH, PIN5 Blue/White CANL, PIN6 Green NC, PIN7 Brown/White NC, PIN8 Brown NC. NOTE the 485_A/485_B pin order is the reverse of the Tower (non-Pro) manual - do not assume the two are interchangeable. |
| rs232 | Datasheet 'Communication' row reads 'CAN/RS485/RS232'; the user manual documents only CAN and RS485 on the BDU inverter RJ45 |
| rs485 | True |
| usb | UNKNOWN |
| wifi | Yes - the BDU carries a 'WiFi antenna' and a 'WiFi status light' (manual Table 2-5) |
Protection
| fire_suppression | Aerosol fire extinguishing equipped (datasheet 'Fire Protection'); official page claims '5-second fire extinguishing' |
| notes | Optional PTC heating: activates below 2 C, exits above 5 C, powered from the inverter or the battery itself, cut off when SOC<20%. |
| overcurrent | BDU DC breaker described as 'Master switch; short circuit protection' |
| short_circuit_current_ka | 1.5 |
Certifications
| emc_certifications | CE-EMC |
| safety_certifications | VDE2510-50 / IEC62619 / IEC63056 / IEC62477 / IEC62040; manual also names TUV certification |
| standards | UN38.3/VDE2510-50/IEC62619/IEC63056/IEC62477/IEC62040/CE-EMC/ROHS |
| transport_certifications | UN38.3 |
Warranty & service
| conditions | UNKNOWN |
| summary | Datasheet 'Warranty' row: '10/15 Years (optional)'. Etronixcenter adds '10 years on the BMS' and a '15-year manufacturer warranty on the batteries'. |
| years | 10 (15 optional) |
Documents
compatibility_list
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Dyness Tower Pro Series Compatibility List 2025-10-16 - official — located, not retrieved
rev 20251016
datasheet
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Dyness Tower Pro Datasheet EN 2025-10-30 (DynessTowerProDatasheetEN20251030.pdf) - official, linked from the Tower Pro product page — located, not retrieved
rev 2025-10-30
datasheet
Dyness Tower Pro datasheet-EN V1.0-20240520 - distributor mirror on zuidwestsolar.nl
rev V1.0-20240520
datasheet
Dyness Tower Pro datasheet-EN V1.0-20240520 - second distributor mirror on rayshine-solar.com (corroborating copy)
rev V1.0-20240520
distributor_listing
7SUN distributor listing: Battery module - DYNESS - HV9640 - PRO - 3.84 kWh - HV
rev UNKNOWN
distributor_listing
Etronixcenter distributor listing: Dyness Tower PRO Base + BDU (ref. DY-002)
rev UNKNOWN
distributor_listing
Solartraders distributor listing: Dyness Tower Pro BDU Battery Management System
rev UNKNOWN
Recorded conflicts
environment.operating_temperature_discharge_min_c Review required
-10 — Tower Pro User Manual Table 2-1 'Discharge temperature range [C]' = -10~55 / -20~55 with heating
0 — Tower Pro datasheet V1.0-20240520 'Discharging Temperature' = '0~55C/-20~55C (with heating function)'
electrical.operating_voltage_max_v Review required
540 — Tower Pro User Manual Table 2-1 'Voltage range [V/DC]' = 420-540
547 — Tower Pro datasheet V1.0-20240520 'Operating Voltage Range' = 420-547V
physical.weight_kg Review required
206.0 — Tower Pro User Manual Table 2-1 'Weight [kg]' and Tower Pro datasheet V1.0-20240520 'Net Weight' (two independent distributor mirrors agree)
231.0 — Dyness Tower Pro official product page, technical specification table 'Net Weight'
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Battery system charge voltage [V/DC] | 540 V |
| Charge current standard [A] | 8 A |
| Charge rate claim (official page) | 'maximum 1C charge and discharge' / 'One hour to fully charge the battery' |
| Discharge current standard [A] | 8 A |
| Discharge minimum voltage [V/DC] | 420 V |
| Grounding resistance | '<=100mOhm' (system) / '<1Ohm' (installation requirement) |
| Heating function (official page + datasheet) | PTC Heating (optional); activates below 2 C, exits above 5 C, cut off at SOC<20% |
| Max depth of discharge | 100% |
| OTA Remote Upgrade | Available (datasheet); official page 'remote upgrade (optional)' |
| Pre-storage SOC | 50-55%; activate every 10 months; SOC calibration at least once every 2 weeks; storage beyond 3 months needs attention |
| Short circuit current [kA] | 1.5 kA |
| WAKE button | 'Press and hold this button for 5s to start the battery system' |
| identity.product_status | current |
| manufacturer_legal_entity_as_printed | Dyness Digital Energy Technology Co., LTD |