Knowledge Base ›
Batteries
Sungrow SBH battery module (5.0 kWh)
Official manufacturer
EU / APAC / global
verified Sept. 3, 2026
Identity
| category |
batteries
|
| generation |
SBH
|
| hardware_revision |
User-manual-sourced V11 / V12 revisions are referenced in the ANMA canonical SBH200 record (V12 adds heating); datasheet V4 itself prints no revision
|
| legacy_name |
PACK (term used in the SBH user manual)
|
| manufacturer |
Sungrow
|
| market_version |
IEC / EN datasheet V4
|
| model |
SBH battery module (5.0 kWh)
|
| product_family |
SBH
|
| product_status |
active
|
| product_status_evidence |
Component of the SBH series, active in Compatibility List V4.3 (01.06.2026)
|
| region |
EU / APAC / global
|
| release_year |
UNKNOWN
|
| sku |
UNKNOWN
|
| subcategory |
battery module (component of an SBH stack)
|
| variant_note |
THIS IS THE MODULE, NOT A SYSTEM. Sungrow's datasheet calls it a 'PACK'. System energy is this figure times module count.
|
Electrical
| architecture |
HV (series element of a 2-8 module stack)
|
| cell_chemistry |
LiFePO4 Prismatic Cell
|
| current_note |
The 50 A continuous figure is printed at SYSTEM level and was NOT carried down to the module.
|
| cycle_life |
UNKNOWN
|
| expansion_rules |
2 to 8 modules per tower (Compatibility List V4.3, SH5.0-25T row: 'SBH100-400 2 to 8 modules')
|
| firmware_requirements |
UNKNOWN
|
| max_charge_current_a |
UNKNOWN
|
| max_charge_power_kw |
UNKNOWN
|
| max_discharge_current_a |
UNKNOWN
|
| max_discharge_power_kw |
UNKNOWN
|
| max_parallel_stacks |
2 with Y-connector (SH5.0-25T); 1 (SH5.0-10RT)
|
| mixed_generation_restrictions |
UNKNOWN
|
| module_energy_kwh |
5.0
|
| modules_max |
8
|
| modules_min |
2
|
| nominal_energy_kwh |
5.0
|
| nominal_voltage_note |
NOT printed per-module on datasheet V4. System nominal voltage advances by exactly 70.4 V per module across all seven columns, but that is a derivation and is not asserted here. (The ANMA canonical SBH200 record already carries 70.4 V from the user manual - see documented_relationships.)
|
| nominal_voltage_v |
UNKNOWN
|
| operating_voltage_max_v |
UNKNOWN
|
| operating_voltage_min_v |
UNKNOWN
|
| rated_power_kw |
UNKNOWN
|
| round_trip_efficiency_pct |
UNKNOWN
|
| usable_dod_pct |
100
|
| usable_energy_kwh |
5.0
|
Physical / mechanical
| cooling |
Natural convection (as part of the stack)
|
| depth_mm |
UNKNOWN
|
| dimensions_note |
Module dimensions are NOT printed on datasheet V4. The enclosure grows exactly 160 mm per module, which matches the 675 x 160 x 350 mm module dimensions the ANMA canonical SBH200 record holds from the user manual - recorded in raw_discovered as corroboration, not asserted from this datasheet.
|
| height_mm |
UNKNOWN
|
| ip_rating |
UNKNOWN
|
| mounting |
Stacked on SBH base
|
| weight_kg |
45
|
| width_mm |
UNKNOWN
|
Installation
| indoor_outdoor |
Indoor/Outdoor (as part of the stack)
|
| supported_installation_topology |
Series element of one SBH tower
|
Environment
| charge_temperature_c |
0 to 50
|
| discharge_temperature_c |
-20 to 50
|
| humidity |
0% - 95% no condensing
|
| max_altitude_m |
2000
|
| noise |
UNKNOWN
|
| storage_temperature_c |
UNKNOWN
|
| temperature_note |
Inherited from the SBH system datasheet; charge and discharge windows differ.
|
Interfaces & connectors
| can |
UNKNOWN
|
| communication_protocol |
UNKNOWN
|
| ethernet |
UNKNOWN
|
| ports |
Module interconnect only; the CAN link to the inverter is made at the stack.
|
| rs485 |
UNKNOWN
|
Protection
| note |
Protections documented at system level.
|
Certifications
| listed |
['CE', 'CEC', 'IEC 62619', 'IEC 62040', 'UN 38.3', 'VDE 2510-50', 'IEC 62477', 'IEC 63056']
|
| note |
Certificates printed at system level.
|
Warranty & service
| note |
System-level warranty row '10 Years'
|
| years |
10
|
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| manufacturer_legal_entity_as_printed | Sungrow Power Supply Co., Ltd. |
Build a system with this product