ANMASystem BuildingAutomation, Network, Monitoring & Analytics
PREMIUM

Knowledge BaseBatteries

Victron Energy Lithium Battery Smart 12,8V/330Ah

Official manufacturer global verified Sept. 2, 2026

Identity

category batteries
manufacturer Victron Energy B.V.
model Lithium Battery Smart 12,8V/330Ah
product_family Lithium Battery Smart 12,8V & 25,6V
product_status active
region global
sku UNKNOWN

Electrical

capacity_loss <1% per 100 cycles @ 25 °C, 100 % DoD
charge_voltage_v Between 14 V and 14,4 V (14,2 V recommended)
chemistry LiFePO4 (Lithium Iron Phosphate)
cycle_life {'at_80_pct_dod': 2500, 'at_70_pct_dod': 3000, 'at_50_pct_dod': 5000}
end_of_discharge_voltage_v 11.2
energy_loss <1% per 100 cycles @ 25 °C, 100 % DoD
float_voltage_v 13.5
integrated_cell_balancing True
max_charge_current_a 400
max_continuous_discharge_current_a 400
nominal_capacity_ah_at_0c 260
nominal_capacity_ah_at_25c 330
nominal_capacity_ah_at_minus20c 160
nominal_energy_kwh_at_25c 4.22
nominal_energy_wh_at_25c 4220
nominal_voltage_v 12.8
peak_discharge_current_a UNKNOWN
recommended_charge_current_a <=150
recommended_continuous_discharge_current_a <=300
round_trip_efficiency_pct 92

Physical / mechanical

bms_connection M8 circular connector, 50 cm cable (male + female)
depth_mm 206
dimensions_h_w_d_mm 265 x 359 x 206
height_mm 265
mounting_orientation Must be mounted upright only - the technical data table states 'Can be placed on their sides: No' for this model
power_connection_terminals M10 threaded inserts
terminal_torque UNKNOWN
weight_kg 29
width_mm 359

Installation

bms_requirement_note A Victron BMS is required; smallBMS, VE.Bus BMS V2, VE.Bus BMS, Lynx Smart BMS, Smart BMS CL 12/100 and Smart BMS 12/200 are the documented BMS options.
external_bms_required True
max_batteries_per_bms 20
max_storage_time_at_25c 1 year (when fully charged)
series_parallel Up to 20 Victron Lithium Smart batteries in total can be used in a system, regardless of the Victron BMS used

Environment

humidity_non_condensing Max. 95 %
operating_temperature Discharge: -20 °C to +50 °C; Charge: +5 °C to +50 °C
protection_class_ip IP 22
storage_temperature -45 °C to +70 °C

Interfaces & connectors

bluetooth Bluetooth app available to monitor cell voltage and temperature
bms_port M8 circular connector

Protection

cell_balancing integrated
protection_delegated_to external Victron BMS

Certifications

standards ['UL1973', 'IEC62619:2017', 'UL9540A', 'IEC 62133:2012', 'IEC62620:2014', 'UL1642', 'EN-IEC 61000-6-3:2007/A1:2011/AC:2012', 'EN 55014-1:2017/A11:2020', 'ECE R10-6', 'EN 60335-1:2012/AC:2014', 'EN-IEC 62368-1:2020', 'IEC 61427-1:2013']

Warranty & service

summary UNKNOWN

Documents

datasheet 12,8 & 25,6 Volt Lithium-Iron-Phosphate Batteries Smart
user-manual Lithium Battery Smart manual - 3. System design and BMS selection guide
user-manual Lithium Battery Smart manual - 7. Technical data

Additional documented parameters

Recorded verbatim from the source; no schema field exists for these yet.

Can be placed on their sidesNo
Nominal capacity @ -20°C*160Ah
Nominal capacity @ 0°C*260Ah
observation:electrical.nominal_energy_wh_at_25c{"values": [{"value": 4220, "source": "Lithium Battery Smart manual - 7. Technical data", "source_url": "https://www.victronenergy.com/media/pg/Lithium_Battery_Smart/en/technical-data.html", "quote": "Nominal energy @ 25°C* | 4220Wh"}], "note": "Arithmetic check: 12,8 V x 330 Ah = 4224 Wh, but Victron documents 4220 Wh. Recorded as documented; not corrected."}

Build a system with this product