Knowledge Base › Battery Management Systems
Victron Energy Lynx Smart BMS NG 1000A (M10)
Official manufacturer global verified Sept. 2, 2026
Identity
| category | battery_management_systems |
| manufacturer | Victron Energy B.V. |
| model | Lynx Smart BMS NG 1000A (M10) |
| product_family | Lynx Smart BMS NG |
| product_status | active |
| region | global |
| sku | LYN034170310 |
Electrical
| battery_voltage_range_vdc | 9 - 60 VDC |
| contactor_continuous_rating_a | 1000 |
| contactor_peak_rating | 1200 A for 5 minutes |
| power_consumption_off_mode | 0.3 mA |
| power_consumption_on_mode | Approximately 4.2 W |
| power_consumption_standby | Approximately 0.6 W |
| pre_charge_minimum_load | 10 Ω and above for 12 V systems; 20 Ω and above for 24 V and 48 V systems |
| reverse_polarity_protection | No |
| supply_voltage_range_vdc | 9 - 60 Vdc |
| supported_system_voltages_v | 12, 24 or 48 V |
Physical / mechanical
| busbar_dimensions_h_w_mm | 8 x 30 |
| busbar_material | Tinned copper |
| busbar_terminals | M10 |
| busbar_torque | 33 Nm |
| depth_mm | 100 |
| dimensions_h_w_d_mm | 230 x 180 x 100 |
| enclosure_material | ABS |
| height_mm | 230 |
| weight_kg | 2.7 |
| width_mm | 180 |
Installation
| battery_connection_method | Up to 50 batteries can be connected to the BMS by daisy chaining them |
| lynx_distributor_modules | Up to 4 Lynx Distributor modules via RJ10 |
| max_batteries_supported | 50 |
| supported_battery_types | Victron Lithium NG batteries (LiFePO4 12,8 V / 25,6 V / 51,2 V) |
Environment
| humidity_non_condensing | Max. 95 % |
| operating_temperature | -40 °C to +60 °C |
| protection_class_ip | IP22 |
| storage_temperature | -40 °C to +60 °C |
Interfaces & connectors
| battery_bms_cables | Male and female circular 3-pole connector with M8 screw ring (BTV cables) |
| bluetooth | Bluetooth (VictronConnect) - documented for the Lynx Smart BMS family |
| bms_can | UNKNOWN |
| io_connector | Removable 13-pin multi-connector with screw terminals |
| lynx_distributor_link | RJ10 |
| nmea2000 | UNKNOWN |
| ve_can | RJ45 and RJ45 terminator |
| ve_direct | UNKNOWN |
Protection
| allow_to_charge_output | 0.5 A at 60 Vdc |
| allow_to_discharge_output | 0.5 A at 60 Vdc |
| aux_output | 1.1 A continuous, protected by a resettable fuse |
| contactor_function | Built-in 1000 A contactor |
| pre_alarm | UNKNOWN - not itemised as a specification row in the fetched NG documents |
| programmable_relay_spdt | 2 A at 60 Vdc |
Certifications
| standards | ['EN-IEC 63000:2018', 'EN-IEC 61000-6-3:2007/A1:2011/AC:2012', 'NEN-EN-ISO 9001:2015'] |
Warranty & service
| summary | UNKNOWN |
Documents
datasheet
Lynx Smart BMS NG
user-manual
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Lynx Smart BMS NG Manual 500A (M10) | 1000A (M10) Rev 14 - 07/2026 (PDF) — located, not retrieved
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Busbar (h x w) | 8 x 30 mm |
| Enclosure material | ABS |
| documented_relationship:bms_battery | {"to_manufacturer": "Victron Energy", "to_model": "Lithium NG battery range (12,8 V / 25,6 V / 51,2 V)", "relationship_type": "bms_battery", "source": "Datasheet - Lithium NG batteries 12,8V, 25,6V & 51,2V", "source_url": "https://www.victronenergy.com/upload/documents/Datasheet-Lithium-NG-batteries-12,8V-25,6V-51,2V-EN-.pdf", "confidence": "officially-verified", "notes": "'Lynx Smart BMS NG 500 A / 1000 A, must be purchased separately'"} |