Continental Control Systems ACTL-1250-600

Official manufacturer US verified Sept. 25, 2026

category	current_transformers
manufacturer	Continental Control Systems
model	ACTL-1250-600
product_status	active
region	US
variant	—

accuracy_class	Standard (1.2) Accu-CT ACTL-1250 Split-Core CT
accuracy_option_c06_percent	0.5 Accu-CT ACTL-1250 Split-Core CT
accuracy_percent	0.75 Accu-CT ACTL-1250 Split-Core CT
aperture_size	1.25 x 1.77 in Accu-CT ACTL-1250 Split-Core CT
bidirectional	True
cable_gauge_awg	20 Accu-CT ACTL-1250 Split-Core CT
cable_length_m	2.4 Accu-CT ACTL-1250 Split-Core CT
ct_type	split_core Accu-CT ACTL-1250 Split-Core CT
frequency_hz	50-60 Accu-CT ACTL-1250 Split-Core CT
internal_burden_resistance_ohm	3.3 ACTL-1250 Internal Burden Resistance
max_current_a	1250.0
measurement_category	600 Vac CAT IV Accu-CT ACTL-1250 Split-Core CT
measurement_type	Current Transformer (CT)
operating_humidity_percent_rh	[5, 95] Accu-CT ACTL-1250 Split-Core CT
output_voltage_vac	0.333 Accu-CT ACTL-1250 Split-Core CT
phase_angle_deg	0.5 Accu-CT ACTL-1250 Split-Core CT
phase_count	1
primary_current_a	600 Accu-CT ACTL-1250 Split-Core CT
rated_insulation_voltage_v	600 Accu-CT ACTL-1250 Split-Core CT
secondary_voltage_mv	333 Accu-CT ACTL-1250 Split-Core CT
split_core	True Accu-CT ACTL-1250 Split-Core CT
voltage_rating_v	230.0
weight_g	395 Accu-CT ACTL-1250 Split-Core CT

dimensions_mm

{'width': 114.0, 'height': 83.4, 'thickness': 40.2}

Accu-CT ACTL-1250 Split-Core CT

operating_temperature_max_c	75 Accu-CT ACTL-1250 Split-Core CT
operating_temperature_min_c	-30 Accu-CT ACTL-1250 Split-Core CT

certifications

['UL 2808 listed, file E363660 (XOBA)']

Accu-CT ACTL-1250 Split-Core CT

application_note ACTL-1250 Internal Burden Resistance

datasheet ACTL-0750 / ACTL-1250 brochure

datasheet ACTL-1250 Data Sheet

datasheet Accu-CT Series Sales Brochure

installation_manual ACTL-1250 CT Manual

product_page Accu-CT ACTL-1250 Split-Core CT

electrical.measurement_category Resolved — kept current value

600 Vac CAT IV — stored value

CAT IV — 600 Vac, CAT IV (service entrance) for pollution degree 2

Detected during import deep-enrich-2026-09-batch09

electrical.frequency_hz Resolved — kept current value

50-60 — stored value

[50, 60] — Line frequency: 50 to 60 Hz nominal (available for up to 400 Hz)

Detected during import deep-enrich-2026-09-batch09

electrical.accuracy_class Resolved — kept current value

Standard (1.2) — stored value

IEEE C57.13 class 1.2 — IEEE C57.13 accuracy: class 1.2 from 1% to 120% of rated current

Detected during import deep-enrich-2026-09-batch09

Recorded verbatim from the source; no schema field exists for these yet.

builder_completeness	partial
region_notes	US manufacturer (Boulder, Colorado); the model table prints one 50-60 Hz, 600 Vac CAT IV rating, so no regional split was created.