Official manufacturerGlobal (12/24/48V DC systems)verified Sept. 2, 2026
PRODUCT PHOTO
Identity
category
dc_distribution
manufacturer
Victron Energy B.V.
model
Lynx Power In
product_family
Lynx Distribution System
product_status
active
product_status_evidence
Listed as a current product in the DC distribution systems category on victronenergy.com.
region
Global (12/24/48V DC systems)
sku
LYN020102000
sku_note
Observed in product-image filenames on the official Victron product page and understood there to designate the M8 version; no order-code table was found in the manual, so this code is recorded as observed rather than as a confirmed catalogue entry. The M10 version's code is UNKNOWN.
variants
M8 and M10 busbar versions; the manual publishes a single shared specification table for both.
Electrical
continuous_current_rating
1000Adc continuous
current_rating_statement
'The Lynx Distributor, Lynx Shunt VE.Can, Lynx Class-T Power In and the Lynx Power In are rated for a nominal current of 1000A for 12, 24 or 48 System voltages.'
reverse_polarity_protection
UNKNOWN
self_consumption
None - passive module with no electronics
voltage_range
9 - 60Vdc
Physical / mechanical
busbar_dimensions_hxw
8 x 30mm
busbar_material
Tinned copper
dimensions_hxwxd
290 x 170 x 80 mm
enclosure_material
ABS
protection_class
IP22
weight
2.1 kg
Installation
bolt_torque
UNKNOWN
busbar_connection
M8 or M10 (version dependent); fuse and cable connections remain M8 on both versions
fuse_positions
None - the Lynx Power In has no fuse positions (fusing is provided by the Lynx Distributor, Lynx Shunt VE.Can or Lynx Class-T Power In)
number_of_connections
'The Lynx Power In contains a positive and negative busbar with 4 connections for batteries, loads or chargers and a ground connection.'
number_of_dc_connections
4 per busbar, plus a ground connection
Environment
humidity
Max. 95% (non-condensing)
operating_temperature_range
-40°C to +60°C
storage_temperature_range
-40°C to +60°C
Interfaces & connectors
monitoring
None - passive busbar module with no monitoring, LEDs or communication ports
Protection
note
No electronic protection - passive busbar module
Certifications
standards
['UNKNOWN - a Declaration of Conformity PDF covering Lynx DC distribution is published but was not fetched, so no standard is claimed']
Warranty & service
summary
5-year standard warranty and global repair service
Documents
certificate
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Declaration of Conformity - Lynx DC distribution (2023-08-28) — located, not retrieved
drawing
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Lynx Power In enclosure dimensions (M10) — located, not retrieved
drawing
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Lynx Power In enclosure dimensions (M8) — located, not retrieved
manual
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Lynx Power In Manual (PDF) — located, not retrieved
manual
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
Lynx Power In Manual - 5. Installation — located, not retrieved