Easee Charge Core
Official manufacturer EU verified Sept. 20, 2026
Identity
| category | ev_chargers |
| ean | — |
| firmware | {'documented_version': 'UNKNOWN', 'constraints': 'UNKNOWN'} |
| generation | — |
| manufacturer | Easee |
| market_version | — |
| model | Charge Core |
| mpn | — |
| product_family | Easee EV chargers |
| product_status | active |
| region | EU |
| release_year | — |
| series | Charge |
| sku | — |
Electrical
| ac_connection | — |
| ac_voltage_range | — |
| charging_mode | — |
| connector_type | Type 2 |
| frequency_range_hz | — |
| load_balancing | Load and phase balancing between chargers, including offline operation; automatic phase balancing requires the Easee Equalizer |
| max_ac_current_a | 32 |
| max_ac_power_kw | 22 kW (3-phase) / 7.4 kW (1-phase) |
| max_current_a | 32.0 |
| nominal_ac_voltage | — |
| nominal_frequency_hz | — |
| nominal_voltage_v | 230.0 |
| phase_count | 1 or 3 (single-phase and three-phase configurations) |
| rated_ac_power_w | — |
| rated_power_kw | 7.4 |
Physical / mechanical
| ac_terminal | Type-2 socket |
| cooling | — |
| depth_mm | 106 |
| dimensions_mm | 193 x 256 x 106 |
| display | — |
| enclosure_material | — |
| height_mm | 256 |
| mounting | — |
| noise_db | — |
| weight_kg | 1.5 |
| width_mm | 193 |
Installation
| cable_requirements | — |
| commissioning | — |
| installation_angle | — |
| mounting_clearances | — |
| torque | — |
Environment
| impact_protection | IK10 |
| ingress_protection | IP54 (backplate IP22 without cover) |
| ip_rating | IP65 |
| max_altitude_m | — |
| operating_temperature_c | -30 to +40 |
| operating_temperature_max_c | 60.0 |
| operating_temperature_min_c | -25.0 |
| pollution_degree | — |
| protective_class | — |
| relative_humidity_pct | — |
| storage_temperature_c | — |
Interfaces & connectors
| app | — |
| communication | ['WiFi 2.4 GHz', 'Bluetooth 4.2', 'Built-in e-SIM (LTE Cat M1)', 'EaseeLink 868 MHz radio'] |
| dry_contact | — |
| meter_interface | — |
| monitoring_portal | — |
| ocpp_version | OCPP 1.6J |
| protocols | ['OCPP 1.6J (cloud)'] |
Protection
| anti_islanding | — |
| dc_fault_detection | 6 mA residual direct current detecting device |
| ik_rating | IK08 |
| overvoltage_category | — |
| rcd | Integrated RCD type A 30 mA AC; 6 mA residual direct current detecting device |
| surge_protection_ac | — |
Certifications
| standards | ['EN IEC 61851-1:2019', 'EN 60947-2', 'IEC 62955', 'UL 94'] |
Warranty & service
| conditions | — |
| extension_options | — |
| standard_years | 5 |
Documents
datasheet
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
EN_Charge_Core_Productsheet.pdf — located, not retrieved
rev UNKNOWN
installation-manual
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
EN_Charge_Core_InstallerGuide.pdf — located, not retrieved
rev UNKNOWN
other
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
EN_Commercial_Charging_Brochure.pdf — located, not retrieved
rev UNKNOWN
user-manual
{# Located but never retrieved: listed, but deliberately not linked, and it
backs no stored value. #}
EN_Charge_Core_UserGuide.pdf — located, not retrieved
rev UNKNOWN
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Connectivity | WiFi 2.4 GHz, Bluetooth 4.2, built-in e-SIM (LTE Cat M1), EaseeLink™ 868MHz radio, Cloud OCPP 1.6J |
| Easee Charge Core page | "Easee Link™ 868MHz Radio"; "Built-in energy meter"; "Built-in e-SIM (LTE Cat M1)" |
| Easee solar support article | "no standard has yet been established in the market" (smart-meter protocol compatibility) |
| Positioning | Commercial AC electric car charger for multi-site installations |
| Socket | Type-2 socket |