SmartEVSE SmartEVSE v3
Manufacturer documented GLOBAL
Identity
| category | ev_chargers |
| manufacturer | SmartEVSE |
| model | SmartEVSE v3 |
| product_family | SmartEVSE v3 |
| product_status | active |
| region | GLOBAL |
| series | SmartEVSE |
Electrical
| ac_voltage_max_v |
240 Vac
SmartEVSE v3 — README.md — line 39
|
| ac_voltage_min_v |
110 Vac
SmartEVSE v3 — README.md — line 39
|
| adjustable_current_range_a |
10-80 A
SmartEVSE v3 — docs/configuration.md — line 113
|
| cable_current_detection |
13/16/32A A
SmartEVSE v3 — README.md — line 24
|
| connector_type | Type 2 |
| contactor_output_voltage_v |
230 VAC
SmartEVSE v3 — README.md — line 21
|
| contactor_outputs |
Two switched 230VAC outputs, for contactors
SmartEVSE v3 — README.md — line 21
|
| custom_meter_registers |
True
SmartEVSE v3 — docs/installation.md — line 33
|
| delayed_charging |
True
SmartEVSE v3 — README.md — line 37
|
| depth_mm |
91 mm
SmartEVSE v3 — README.md — line 40
|
| din_modules |
3
SmartEVSE v3 — README.md — line 40
|
| display_type |
LCD
SmartEVSE v3 — README.md — line 27
|
| dynamic_load_balancing |
True
SmartEVSE v3 — README.md — line 19
|
| external_switch_input |
True
SmartEVSE v3 — docs/configuration.md — line 131
|
| grid_relay_input |
Energy Industry Act, par 14a
SmartEVSE v3 — docs/configuration.md — line 138
|
| height_mm |
58 mm
SmartEVSE v3 — README.md — line 40
|
| home_battery_support |
Rudimentary support for home batteries
SmartEVSE v3 — README.md — line 36
|
| load_balancing_max_units |
8
SmartEVSE v3 — README.md — line 20
|
| locking_actuator_support |
True
SmartEVSE v3 — README.md — line 25
|
| locking_actuator_types |
5
SmartEVSE v3 — README.md — line 10
|
| mains_current_setting_range_a |
10-200 A
SmartEVSE v3 — docs/configuration.md — line 107
|
| max_current_a | 32.0 |
| min_current_setting_range_a |
6-16 A
SmartEVSE v3 — docs/configuration.md — line 110
|
| nominal_voltage_v | 230.0 |
| ocpp_version |
1.6j
SmartEVSE v3 — README.md — line 38
|
| ota_firmware_update |
True
SmartEVSE v3 — README.md — line 32
|
| phase_count | 1 |
| phase_switching |
True
SmartEVSE v3 — README.md — line 21
|
| phases |
1-3
SmartEVSE v3 — README.md — line 10
|
| rated_power_kw | 7.4 |
| residual_current_monitoring |
Residual Current Monitor (RCM14)
SmartEVSE v3 — docs/configuration.md — line 149
|
| rest_api |
True
SmartEVSE v3 — README.md — line 34
|
| rfid |
True
SmartEVSE v3 — README.md — line 26
|
| rfid_max_cards |
100
SmartEVSE v3 — README.md — line 26
|
| rgb_led_output |
True
SmartEVSE v3 — README.md — line 29
|
| socket_or_tethered |
fixed charging cable or charging socket
SmartEVSE v3 — README.md — line 10
|
| solar_surplus_charging |
True
SmartEVSE v3 — docs/configuration.md — line 18
|
| usb_port |
USB-C
SmartEVSE v3 — README.md — line 32
|
| width_mm |
52 mm
SmartEVSE v3 — README.md — line 40
|
| wifi |
True
SmartEVSE v3 — docs/configuration.md — line 167
|
Environment
| integrated_temperature_sensor |
True
SmartEVSE v3 — README.md — line 28
|
| ip_rating | IP65 |
| max_temperature_setting_range_c |
40-75 °C
SmartEVSE v3 — docs/configuration.md — line 233
|
| operating_temperature_max_c | 60.0 |
| operating_temperature_min_c | -25.0 |
Interfaces & connectors
| device_type | DIN-rail EV charge controller (EVSE controller, 3 DIN modules) driving external mains contactor(s); not a complete wallbox |
| modbus_baud_rate |
9600 bps
SmartEVSE v3 — docs/installation.md — line 39
|
| modbus_parity |
NONE
SmartEVSE v3 — docs/installation.md — line 40
|
| modbus_rtu |
True
SmartEVSE v3 — README.md — line 13
|
| modbus_stop_bits |
1
SmartEVSE v3 — docs/installation.md — line 41
|
| mqtt |
True
SmartEVSE v3 — README.md — line 33
|
| network_meter_support |
HomeWizard
SmartEVSE v3 — docs/configuration.md — line 47
|
| rs485 |
True
SmartEVSE v3 — README.md — line 22
|
| web_interface |
True
SmartEVSE v3 — docs/operation.md — line 14
|
Protection
| ik_rating | IK08 |
Documents
technical-manual
SmartEVSE v3 — README.md
technical-manual
SmartEVSE v3 — docs/configuration.md
technical-manual
SmartEVSE v3 — docs/installation.md
technical-manual
SmartEVSE v3 — docs/operation.md