SolarEdge SE-EVK22C00-01
Official manufacturer EU verified Sept. 22, 2026
Identity
| category | ev_chargers |
| ean | — |
| firmware | {'documented_version': 'UNKNOWN', 'constraints': 'Supported from inverter firmware version 4.21'} |
| generation | — |
| manufacturer | SolarEdge |
| market_version | SolarEdge EV Charger For Europe (DS-000191-EU) |
| model | SE-EVK22C00-01 |
| mpn | SE-EVK22C00-01 |
| product_family | SolarEdge EV Charger |
| product_status | active |
| region | EU |
| release_year | — |
| series | SE-EVK22 |
| sku | SE-EVK22C00-01 |
| variant | SolarEdge EV Charger - 22 kW Three Phase |
Electrical
| cable_length_m | 6 |
| connection_form | cable |
| connector | Type 2: up to 32 A / 400 V AC in accordance with EN 62196-1 |
| max_ac_current_a | 32 |
| max_current_a | 32 |
| max_rated_power_kw | 22 |
| nominal_ac_voltage | 3 x 230 / 400 V |
| nominal_frequency_hz | 50 |
| nominal_voltage_v | 400.0 |
| official_product_url |
https://www.solaredge.com/en/products/residential/ev-charging
SolarEdge EV Charger (family page)
|
| phase_count | 3 |
| rated_ac_power_kw | 4.6 / 7.4 / 11 / 22 (configurable) |
| rated_current_a | 10 / 13 / 16 / 20 / 25 / 32 (single phase or three phase, configurable) |
| rated_power_kw | 22.0 |
Physical / mechanical
| ac_terminal | — |
| connector_type | Type 2 (EN 62196-1 / VDE-AR-E 2623-2-2) |
| cooling | — |
| dc_connector | — |
| depth_mm | 142.0 |
| dimensions_mm | 643.0 x 240 x 142 |
| display | — |
| enclosure_material | — |
| height_mm | 240.0 |
| mounting | — |
| noise_db | — |
| weight_kg | 7.8 |
| width_mm | 643.0 |
Installation
| cable_requirements | — |
| commissioning | — |
| installation_angle | — |
| mounting_clearances | — |
| torque | — |
Environment
| impact_protection | IK10 |
| ingress_protection | IP54 |
| ip_rating | IP54 |
| max_altitude_m | — |
| operating_temperature_c | -25 to +50 at 16 A; -25 to +40 at 32 A |
| operating_temperature_max_c | 60.0 |
| operating_temperature_min_c | -25.0 |
| pollution_degree | — |
| protective_class | — |
| relative_humidity_pct | — |
| storage_temperature_c | — |
Interfaces & connectors
| app | — |
| communication | ['Ethernet 10 / 100 Mbit/s', 'WLAN / Wi-Fi IEEE 802.11 b,g,n 2.4 GHz'] |
| dry_contact | — |
| meter_interface | — |
| monitoring_portal | — |
| ocpp_version | OCPP 1.6J |
| protocols | ['OCPP (SolarEdge OCPP pre-configured)'] |
| rfid | not included in this part number |
Protection
| anti_islanding | — |
| arc_fault | — |
| dc_switch | — |
| ik_rating | IK08 |
| insulation_monitoring | — |
| overvoltage_category | — |
| rcmu | — |
| residual_dc_detection | RDC-DD >= 6 mA in accordance with IEC 62955 |
| reverse_polarity | — |
| surge_protection_ac | — |
| surge_protection_dc | — |
Certifications
| standards | ['IEC 61851-1 (Type 2 AC charging)', 'EN 62196-1 (Type 2 connector)', 'IEC 62955 (RDC-DD)', 'EN 50470-1 / EN 50470-3 (MID metering option, Accuracy Class B)', 'ISO 14443 / ISO 15693 (RFID)'] |
Warranty & service
| conditions | — |
| extension_options | — |
| standard_years | 3 |
Documents
product_page
SolarEdge EV Charger (family page)
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Dimensions / Weight | 643 / 495 X 240 X 142 mm; 7.8 / 5 kg |
| MID metering | Optional, Accuracy Class B |
| Rated AC Power | 4.6 / 7.4 / 11 / 22 kW |
| Rated AC power output | 4.6 / 7.4 / 11 / 22 kW |
| SolarEdge EV Charger datasheet | "MID: Optional, Accuracy Class B (according to EN 50470-1 / -3)" |
| SolarEdge EV Charger datasheet (DE), Nennstrom row | "Nennstrom (konfigurierbar) 10 / 13 / 16 / 20/ 25 / 32 einphasig oder dreiphasig A" |
| SolarEdge load control application note v1.4 | "You can configure an EV charger as an Essential device during backup. During the transition period and the first 30 seconds of backup, the EV charge power is at 50%." |
| documented_relationship:inverter_accessory | {"to_manufacturer": "SolarEdge", "to_model": "SolarEdge Home Hub Inverters / SolarEdge Home Wave Inverters / SolarEdge Short String Inverters / SolarEdge Three Phase Inverters (SE16K and SE17K)", "relationship_type": "inverter_accessory", "match_level": "family", "status": "compatible", "source": "SolarEdge EV Charger For Europe", "source_url": "https://knowledge-center.solaredge.com/sites/kc/files/se-ev-charger-datasheet-eu.pdf", "source_page": "Compatible SolarEdge Inverters block", "confidence": "officially-verified", "required_accessories": "UNKNOWN", "required_firmware": "inverter firmware version 4.21 or later", "region": "EU", "notes": "Verbatim: 'Residential inverters with SetApp configuration, including: SolarEdge Home Hub Inverters, SolarEdge Home Wave Inverters, SolarEdge Short String Inverters, SolarEdge Three Phase Inverters (SE16K and SE17K)'. Up to three chargers per site. |
| identity.variant_as_researched | SolarEdge EV Charger - 22 kW Three Phase, 6m Cable, Type 2 Connector |