Wallbox Pulsar Plus (NA/NACS, PUP2)
Official manufacturer NA verified Sept. 2, 2026
Wallbox Help Center, 'Pulsar Plus - Product Overview' (NA), product overview image
Identity
| cable_or_socket | tethered cable, 25 ft (7.6 m) |
| category | ev_chargers |
| ean | UNKNOWN |
| generation | PUP2 |
| manufacturer | Wallbox |
| market_version | North America (208/240 V, 60 Hz) |
| model | Pulsar Plus (NA/NACS, PUP2) |
| mpn | PN: PUPX-U-X-X-N-XX2 |
| product_family | Pulsar Plus |
| product_status | active |
| region | NA |
| sku | UNKNOWN |
| variants | 40 A / 9.6 kW (NEMA 14-50 plug or hardwired) and 48 A / 11.5 kW (hardwired only) |
Electrical
| adjustable_current_range_a | 6-48A (hardware selector 16-48A, software down to 6A) |
| api_cloud | True |
| api_local | UNKNOWN (no local API documented; myWallbox app connects over Bluetooth/Wi-Fi) |
| dynamic_load_balancing | True |
| home_assistant_integration | via-integration (official HA core 'Wallbox' integration via cloud API) |
| max_current_a |
48
Wallbox Pulsar Plus NA/NACS Technical Datasheet — datasheet spec table, 40 A / 48 A configurations
|
| max_power_kw | 11.5 |
| meter_integration | ['Wallbox Power Meter (proprietary accessory)'] |
| modbus_support | UNKNOWN |
| mqtt_support | UNKNOWN (not documented) |
| ocpp_support | OCPP 1.6J |
| phase_type | single-phase (208/240V) NA; EU variant reportedly 3-phase up to 22kW, not verified |
| solar_surplus_charging | True |
| supported_inverter_ems_integrations | UNKNOWN - Wallbox documents no inverter-brand integration. Eco-Smart works from a Wallbox energy meter at the grid connection point; the guide only requires that 'Your installer must set your energy generation system's inverter mode to Export'. |
Physical / mechanical
| cable_length_m | 7.6 (25 ft) |
| depth_mm | 99 (3.9 in, without cable) |
| enclosure_material | UNKNOWN |
| height_mm | 201 (7.9 in, without cable) |
| housing_color | Matte Black |
| mounting_bolt_size | wallplate screws 3.5 x 9.5 mm (x2); wall anchors 8 x 40 mm (x4, solid walls); holster screws 5 x 40 mm (x2); cover screws 4 x 10 mm Torx (x2, hardwire version) |
| mounting_hole_spacing_mm | UNKNOWN (mounting template supplied) |
| mounting_type | ['wall'] |
| screw_sizes | see mounting_bolt_size |
| shipping_weight_kg | UNKNOWN |
| terminal_locations | supply terminal block, 10 to 6 AWG (6 mm2 to 16 mm2) |
| torque_specs |
terminal torque 11.5 in.lbs (1.3 N.m)
Installation Guide PULSAR PLUS (North America) — installation guide, wiring section: '11.5in.lbs (1.3N.m)'
|
| weight_kg | 2.0 (4.4 lbs w/o cable) |
| width_mm | 198 (7.8 in, without cable) |
Installation
| clearance_note | minimum clearance at least 18 in (46 cm) |
| indoor_outdoor | Indoor & Outdoor: NEMA Type 4 per UL 50E |
| max_installation_altitude_m | UNKNOWN |
| mounting_height_mm |
charger (plug-in) 1300-1700 mm (50-67 in); outlet 1100-1500 mm (43-59 in); holster outdoor 450-1200 mm (18-48 in); holster indoor 600-1200 mm (24-48 in)
Installation Guide PULSAR PLUS (North America) — installation guide, mounting-height figures
|
| mounting_orientation | vertical wall mount |
| required_rcd_type | no external GFCI documented - integrated CCID20 + ground monitoring |
| required_upstream_breaker | new dedicated two-pole breaker; NEMA plug-in installation: 50 A branch-circuit overcurrent protection; hardwired: 125% of the selected maximum amperage setting |
| supply_cable_requirements | 10 to 6 AWG (6 mm2 to 16 mm2) copper |
Environment
| cooling_method | UNKNOWN |
| ik_rating | UNKNOWN |
| ip_rating | UNKNOWN for the NA variant (NEMA Type 4 per UL 50E is the stated rating) |
| nema_rating |
NEMA Type 4 per UL 50E
Wallbox Pulsar Plus NA/NACS Technical Datasheet — datasheet: 'Indoor & Outdoor: NEMA Type 4 per UL 50E'
|
| operating_temperature_c | -30 to +40 (-22 F to 104 F) |
| relative_humidity | UNKNOWN |
| storage_temperature_c | -40 to +70 (-40 F to 158 F) |
Interfaces & connectors
| bluetooth | Bluetooth |
| cellular | not fitted |
| cloud_api | myWallbox portal / app (cloud) |
| connector_type | SAE J1772 Type 1 and NACS (both cable variants offered) |
| ethernet | not fitted |
| load_balancing | Static Load Management and Dynamic Load Management (datasheet); Power Sharing between multiple units |
| local_api | UNKNOWN |
| meter_inputs | Wallbox energy meter (CT clamps; installer must verify CT position and orientation) |
| modbus_rtu | used between the charger and the Wallbox energy meter (Inepro meters 'made compatible through Modbus modification') |
| modbus_tcp | UNKNOWN |
| mqtt | UNKNOWN |
| ocpp | OCPP 1.6J |
| protocol_notes |
Solar surplus is the 'Eco-Smart' feature and needs a Wallbox energy meter. Eco mode minimum 2 A per phase (~460 W single-phase); Full Green mode minimum 6 A single-phase (~1380 W) or 3x6 A three-phase (~4140 W).
Solar Charging - Activation and User Guide (Eco-Smart) — Eco-Smart activation guide, Eco / Full Green mode minimum currents
|
| rfid | not fitted |
| rs485 | UNKNOWN (Wallbox energy meters connect by Modbus for Power Boost / Eco-Smart) |
| wifi | Wi-Fi (2.4 GHz, version not stated in the NA datasheet) |
Controls & display
| buttons | UNKNOWN |
| display_type | none |
| leds | Halo LED ring - Green: Ready; Light Blue: connected to EV, ready for charge; Dark Blue (pulsing): charging; Yellow: Locked; Red: Error |
| local_display | False |
| mobile_app | myWallbox App |
| web_interface | myWallbox Portal |
Protection
| dc_leakage_detection | covered by CCID20 in the NA variant (the EU Pulsar Plus instead specifies AC 30 mA / DC 6 mA) |
| ground_fault_protection |
Integrated CCID20 (charge current interruption device, 20 mA) + ground monitoring
Wallbox Pulsar Plus NA/NACS Technical Datasheet — datasheet: 'Integrated CCID20 (Charge current interruption device 20mA) + Ground monitoring'
|
| over_current | UNKNOWN |
| over_temperature | UNKNOWN |
| over_voltage | UNKNOWN |
| overvoltage_category | UNKNOWN |
| protection_class | UNKNOWN |
| residual_current_monitoring | CCID20 (20 mA) |
| under_voltage | UNKNOWN |
| welded_relay_detection | UNKNOWN |
Certifications
| emc | ['FCC Part 15 Class B', 'CAN ICES-003B / NMB-003B'] |
| grid_codes | [] |
| other | [] |
| regional | ['UL Certification (NRTL)', 'ENERGY STAR certified'] |
| safety | ['UL 2594', 'UL 2231', 'UL 50E (NEMA Type 4 enclosure)'] |
Warranty & service
| design_life_years | UNKNOWN |
| extended_options_years | UNKNOWN |
| standard_years | UNKNOWN (Wallbox NA warranty policy page returned HTTP 404 on 2026-09-02) |
Documents
installation-manual
Installation Guide PULSAR PLUS (North America)
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| EU Pulsar Plus (PLP1) family specification | 7.4 kW 32 A 1P / 11 kW 16 A 3P / 22 kW 32 A 3P; 166x163x82 mm; 1 kg; IP54 / IK08; -25 to 40 C (50 C with derating); RCD 'AC 30 mA / DC 6 mA', 'External RCCB required'; CAT III; IEC 61851-1, IEC 61851-21-2, IEC 62196-2, BS 7671:2018; optional Power Boost, Eco-Smart, Power Sharing, Dynamic Power Sharing |
| Eco mode minimum | 2 A per phase (approximately 460 W single-phase) |
| Full Green mode minimum | 6 A single-phase (approx 1380 W) or 3x6 A three-phase (approx 4140 W) |
| Hardware current selector | 40 A model default Position 6; 48 A model default Position 7; adjustable 16 A to rated maximum |
| Inverter configuration requirement for Eco-Smart | Your installer must set your energy generation system's inverter mode to 'Export' |