Knowledge Base › External MPPT Controllers
Victron Energy BlueSolar MPPT 100/30
Official manufacturer GLOBAL verified Sept. 20, 2026
Identity
| category | external_mppt_controllers |
| ean | — |
| generation | — |
| manufacturer | Victron Energy B.V. disputed |
| market_version | — |
| model | BlueSolar MPPT 100/30 |
| mpn | SCC020030200 |
| product_family | BlueSolar MPPT 100/30 & 100/50 |
| product_status | active |
| region | global |
| release_year | — |
| sku | SCC020030200 |
| sku_source | 'SCC020030200 BlueSolar MPPT 100/30' |
Electrical
| battery_voltage_auto_select | True |
| battery_voltage_locator | 'Battery voltage: 12/24V Auto Select' |
| battery_voltage_nominal_v | 12/24/36/48V Auto |
| battery_voltage_options_v | [12, 24] |
| charge_algorithm | Multi-stage adaptive (eight pre-programmed algorithms) or user defined algorithm |
| charge_voltage_absorption_v | Default: 14.4 V / 28.8 V (adjustable) |
| charge_voltage_equalization_v | 16.2 V / 28.8 V (adjustable) as printed in the SmartSolar manual; disabled by default |
| charge_voltage_float_v | Default: 13.8 V / 27.6 V (adjustable) |
| load_output_continuous_current_a | none - this model has no load output |
| max_charge_current_a | 30 |
| max_charge_current_locator | 'Rated charge current' (datasheet) |
| max_efficiency_pct | 98.0 |
| max_pv_open_circuit_voltage_locator | 'Maximum PV open circuit voltage' = 100 V |
| max_pv_open_circuit_voltage_v | 100 |
| max_pv_power_locator | 'Nominal PV power, 12 V' / 'Nominal PV power, 24 V' |
| max_pv_power_w_by_battery_voltage | {'12': 440, '24': 880} |
| max_pv_short_circuit_current_a | 35 |
| max_pv_short_circuit_current_locator | 'Max. PV short circuit current' |
| mppt_operating_voltage_max_v | — |
| mppt_operating_voltage_min_note | 'PV voltage must exceed battery voltage + 5V to start; minimum thereafter is battery voltage + 1V' |
| num_trackers | — |
| num_trackers_note | Victron does not publish a 'number of MPP trackers' row for this model in any document fetched this session; the unit has a single PV input pair. Recorded as UNKNOWN rather than assumed. (For the 150/60 and larger families the manual does state MC4 connector pairs are internally parallel-connected to a single MPPT tracker.) |
| official_manual_url |
https://www.victronenergy.com/upload/documents/Manual_BlueSolar_100-30__100-50/29694-MPPT_solar_charger_manual-pdf-en.pdf
MPPT solar charger manual BlueSolar MPPT 100/30 & 100/50 Rev 12 - 06/2026 — search-index listing (query: Victron BlueSolar MPPT 100/30 100/50 150/35 150/45 manual pdf); document located, not fetched
|
| peak_efficiency_pct | 98 |
| self_consumption | 12 V: 30 mA / 24 V: 20 mA |
| temperature_compensation | 12 V: -16 mV/degC / 24 V: -32 mV/degC |
Physical / mechanical
| bracket_dimensions_mm | 176 x 186 x 71.5 (overall outline including mounting flanges, dimension drawing) |
| depth_mm | 70 |
| dimensions_locator | 'Dimensions (h x w x d) 130 x 186 x 70 mm' |
| enclosure_material | — |
| height_mm | 130 |
| housing_color | Blue (RAL 5012) |
| mounting_hole_diameter_mm | 5 (100/30 drawing, corner radius R4) |
| mounting_hole_spacing_mm | 122 x 131 (100/30 drawing) / 132 x 122 (100/50-150/35-150/45 drawing) |
| mounting_type | ['wall'] |
| power_terminals | 16 mm2 / AWG6 |
| shipping_weight_kg | — |
| weight_kg | 1.3 |
| width_mm | 186 |
| wire_cross_section_mm2 | 16 mm2 / AWG6 |
Installation
| altitude_derating_note | UNKNOWN - not published in the BlueSolar datasheet |
| indoor_outdoor | — |
| max_installation_altitude_m | — |
| mounting_orientation | — |
Environment
| cooling_method | — |
| ip_rating | IP43 (electronics), IP22 (connection area) |
| max_altitude_m | — |
| nema_rating | — |
| operating_temperature_c | -30 to +60 (full rated output up to 40) |
| operating_temperature_max_c | 60.0 |
| operating_temperature_min_c | -25.0 |
| pollution_degree | — |
| relative_humidity | 95%, non-condensing |
| storage_temperature_c | — |
Interfaces & connectors
| battery_terminal_type | screw terminal, 16 mm2 / AWG6 |
| bluetooth | No - not built in. Datasheet 'Bluetooth: VE.Direct Bluetooth Smart dongle needed' |
| communication | VE.Direct / Bluetooth |
| ethernet | — |
| load_output | False |
| pv_connector_type | screw terminal, 16 mm2 / AWG6 |
| relay_outputs | — |
| remote_on_off | — |
| rs485 | — |
| ve_can | False |
| ve_direct | Yes - 'Data communication port: VE.Direct' |
| wifi | — |
Protection
| over_temperature | Yes |
| over_voltage | — |
| pv_reverse_polarity | UNKNOWN - the SmartSolar manual lists only 'Output short circuit, over temperature' for this family, while the BlueSolar datasheet lists 'PV reverse polarity, output short circuit, over-temperature' |
| short_circuit | Output short circuit |
| under_voltage | — |
Certifications
| standards | ['EN/IEC 62109-1', 'UL 1741', 'CSA C22.2 NO.107.1-16'] |
Warranty & service
| summary | — |
Documents
dimension-drawing
Dimension drawing BlueSolar & SmartSolar MPPT 100/30
Recorded conflicts
identity.manufacturer Review required
Victron Energy B.V. — stored value
Victron Energy — incoming package
Detected during import system-topology-2026-09-batch02
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Charge algorithm | Multi-stage adaptive (eight pre-programmed algorithms) or user defined algorithm |
| Colour | Blue (RAL 5012) |
| Environmental condition | Indoor type 1, unconditioned |
| Pollution degree | UNKNOWN |