Knowledge Base › External MPPT Controllers
Victron Energy BlueSolar MPPT 150/35
Official manufacturer global verified Sept. 2, 2026
Unresolved safety-relevant conflict
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
.png)
Identity
| category | external_mppt_controllers |
| ean | UNKNOWN |
| generation | UNKNOWN |
| manufacturer | Victron Energy B.V. |
| market_version | UNKNOWN |
| model | BlueSolar MPPT 150/35 |
| mpn | SCC020035000 |
| product_family | BlueSolar MPPT 150/35 & 150/45 |
| product_status | active |
| region | global |
| release_year | UNKNOWN |
| sku | SCC020035000 |
| sku_source | 'SCC020035000 BlueSolar MPPT 150/35' |
Electrical
| battery_voltage_auto_select | 12 / 24 / 48 V auto select; 36 V manual select |
| battery_voltage_locator | Manual: 'Battery voltage 12V / 24V / 48V Auto select, 36V: Manual select' |
| battery_voltage_options_v | [12, 24, 36, 48] |
| charge_algorithm | Multi-stage adaptive, eight pre-programmed algorithms or user defined |
| charge_voltage_absorption_v | Default: 14,4 / 28,8 / 43,2 / 57,6 V (adjustable) |
| charge_voltage_equalization_v | 16.2 / 32.4 / 48.6 / 64.8 V (adjustable); disabled by default |
| charge_voltage_float_v | Default: 13,8 / 27,6 / 41,4 / 55,2 V (adjustable) |
| internal_temperature_sensor | Yes (datasheet feature list: 'Internal temperature sensor') |
| load_output_continuous_current_a | none - this model has no load output |
| max_charge_current_a | 35 |
| max_charge_current_locator | Datasheet 'Rated charge current'; manual 'Maximum battery current' |
| max_pv_open_circuit_voltage_locator | Datasheet: 'Maximum PV open circuit voltage 150 V absolute maximum coldest conditions / 145 V start-up and operating maximum' |
| max_pv_open_circuit_voltage_v | 150 |
| max_pv_power_locator | 'Nominal PV power, 12 V / 24 V / 36 V / 48 V' |
| max_pv_power_w_by_battery_voltage | {'12': 500, '24': 1000, '36': 1500, '48': 2000} |
| max_pv_short_circuit_current_a | 40 |
| mppt_operating_voltage_max_locator | Datasheet 'Maximum PV open circuit voltage ... 145 V start-up and operating maximum' (the manual prints only 150 V - see data_conflicts) |
| mppt_operating_voltage_max_v | 145 |
| mppt_operating_voltage_min_note | 'PV voltage must exceed battery voltage plus 5V to initiate operation; minimum sustained PV voltage is battery voltage plus 1V' |
| num_trackers | UNKNOWN |
| num_trackers_note | Victron does not publish a 'number of MPP trackers' row for this model in any document fetched this session; the unit has a single PV input pair. Recorded as UNKNOWN rather than assumed. (For the 150/60 and larger families the manual does state MC4 connector pairs are internally parallel-connected to a single MPPT tracker.) |
| peak_efficiency_pct | 98 |
| self_consumption | 12 V: 20 mA / 24 V: 15 mA / 48 V: 10 mA |
| temperature_compensation | -16 mV / -32 mV / -64 mV / degC |
Physical / mechanical
| bracket_dimensions_mm | 186 x 176 (dimension drawing outline) |
| depth_mm | 70 |
| dimensions_locator | 'Dimensions (h x w x d) 130 x 186 x 70 mm' |
| enclosure_material | UNKNOWN |
| height_mm | 130 |
| housing_color | Blue (RAL 5012) |
| mounting_hole_diameter_mm | R4 corner radius on the drawing |
| mounting_hole_spacing_mm | 132 x 122 |
| mounting_type | ['wall'] |
| power_terminals | 16 mm2 / AWG6 |
| shipping_weight_kg | UNKNOWN |
| weight_kg | 1.25 |
| width_mm | 186 |
| wire_cross_section_mm2 | 16 mm2 / AWG6 |
Installation
| altitude_derating_note | 5000m (full rated output up to 2000m) |
| indoor_outdoor | Indoor type 1, unconditioned |
| max_installation_altitude_m | 5000 |
| mounting_orientation | UNKNOWN |
Environment
| cooling_method | UNKNOWN (no fan row published) |
| ip_rating | IP43 (electronic), IP22 (connection area) |
| max_altitude_m | 5000 |
| nema_rating | UNKNOWN |
| operating_temperature_c | -30 to +60 (full rated output up to 40) |
| pollution_degree | PD2 |
| relative_humidity | 95 %, non-condensing |
| storage_temperature_c | UNKNOWN |
Interfaces & connectors
| battery_terminal_type | screw terminal, 16 mm2 / AWG6 |
| bluetooth | No - not built in. BlueSolar datasheet: 'VE.Direct Bluetooth Smart dongle needed' |
| ethernet | UNKNOWN |
| load_output | False |
| pv_connector_type | screw terminal, 16 mm2 / AWG6 |
| relay_outputs | UNKNOWN (not published for this family) |
| remote_on_off | UNKNOWN |
| rs485 | UNKNOWN |
| ve_can | False |
| ve_direct | Yes - 1 x VE.Direct port |
| wifi | UNKNOWN |
Protection
| over_temperature | Yes |
| over_voltage | UNKNOWN |
| pv_reverse_polarity | Yes |
| short_circuit | Output short circuit |
| under_voltage | UNKNOWN |
Certifications
| standards | ['EN/IEC 62109-1', 'UL 1741', 'CSA C22.2 NO.107.1-16', 'Kiwa Primara certificate 15-057-02, IEC 62109-1:2010 / EN 62109-1:2010, issued 2021-04-26, applicant Victron Energy B.V., De Paal 35, 1351 JG Almere, The Netherlands'] |
Warranty & service
| summary | UNKNOWN |
Documents
dimension-drawing
Dimension drawing BlueSolar & SmartSolar MPPT 100/50, 150/35, 150/45
Recorded conflicts
electrical.max_pv_open_circuit_voltage_v / mppt_operating_voltage_max_v Review required
150 V absolute maximum coldest conditions; 145 V start-up and operating maximum — document[0]
150 V absolute; 145 V operating maximum — document[0]
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Advanced partial shading detection | BlueSolar / SmartSolar MPPT algorithm feature |
| Colour | Blue (RAL 5012) |
| Environmental condition | Indoor type 1, unconditioned |
| Internal temperature sensor | Yes |
| Pollution degree | PD2 |