ANMASystem BuildingAutomation, Network, Monitoring & Analytics
PREMIUM

Knowledge BaseExternal MPPT Controllers

Victron Energy SmartSolar MPPT 100/30

Official manufacturer global verified Sept. 2, 2026

Identity

category external_mppt_controllers
ean UNKNOWN
generation UNKNOWN
manufacturer Victron Energy B.V.
market_version UNKNOWN
model SmartSolar MPPT 100/30
mpn SCC110030210
product_family SmartSolar MPPT 100/30 & 100/50
product_status active
region global
release_year UNKNOWN
sku SCC110030210
sku_source 'SCC110030210 SmartSolar MPPT 100/30'

Electrical

battery_voltage_auto_select True
battery_voltage_locator 'Battery voltage: 12/24V Auto Select'
battery_voltage_options_v [12, 24]
charge_algorithm Multi-stage adaptive (eight pre-programmed algorithms) or user defined algorithm
charge_voltage_absorption_v Default: 14.4 V / 28.8 V (adjustable)
charge_voltage_equalization_v 16.2 V / 28.8 V (adjustable) as printed in the SmartSolar manual; disabled by default
charge_voltage_float_v Default: 13.8 V / 27.6 V (adjustable)
load_output_continuous_current_a none - this model has no load output
max_charge_current_a 30
max_charge_current_locator 'Rated charge current' (datasheet)
max_pv_open_circuit_voltage_locator 'Maximum PV open circuit voltage' = 100 V
max_pv_open_circuit_voltage_v 100
max_pv_power_locator 'Nominal PV power, 12 V' / 'Nominal PV power, 24 V'
max_pv_power_w_by_battery_voltage {'12': 440, '24': 880}
max_pv_short_circuit_current_a 35
max_pv_short_circuit_current_locator 'Max. PV short circuit current'
mppt_operating_voltage_max_v UNKNOWN (no separate start-up/operating maximum published for this family)
mppt_operating_voltage_min_note 'PV voltage must exceed battery voltage + 5V to start; minimum thereafter is battery voltage + 1V'
num_trackers UNKNOWN
num_trackers_note Victron does not publish a 'number of MPP trackers' row for this model in any document fetched this session; the unit has a single PV input pair. Recorded as UNKNOWN rather than assumed. (For the 150/60 and larger families the manual does state MC4 connector pairs are internally parallel-connected to a single MPPT tracker.)
peak_efficiency_pct 98
self_consumption 12 V: 30 mA / 24 V: 20 mA
temperature_compensation 12 V: -16 mV/degC / 24 V: -32 mV/degC

Physical / mechanical

bracket_dimensions_mm 176 x 186 x 71.5 (overall outline including mounting flanges, dimension drawing)
depth_mm 70
dimensions_locator 'Dimensions (h x w x d) 130 x 186 x 70 mm'
enclosure_material UNKNOWN
height_mm 130
housing_color Blue (RAL 5012)
mounting_hole_diameter_mm 5 (100/30 drawing, corner radius R4)
mounting_hole_spacing_mm 122 x 131 (100/30 drawing) / 132 x 122 (100/50-150/35-150/45 drawing)
mounting_type ['wall']
power_terminals 16 mm2 / AWG6
shipping_weight_kg UNKNOWN
weight_kg 1.3
width_mm 186
wire_cross_section_mm2 16 mm2 / AWG6

Installation

altitude_derating_note 5000m (full rated output up to 2000m)
indoor_outdoor Indoor type 1, unconditioned
max_installation_altitude_m 5000
mounting_orientation UNKNOWN

Environment

cooling_method UNKNOWN (no fan row published)
ip_rating IP43 (electronics), IP22 (connection area)
max_altitude_m 5000
nema_rating UNKNOWN
operating_temperature_c -30 to +60 (full rated output up to 40)
pollution_degree PD3
relative_humidity 95%, non-condensing
storage_temperature_c UNKNOWN

Interfaces & connectors

battery_terminal_type screw terminal, 16 mm2 / AWG6
bluetooth Yes - built in. Manual: 'Data communication: VE.Direct port, Bluetooth via VictronConnect app'
ethernet UNKNOWN
load_output False
pv_connector_type screw terminal, 16 mm2 / AWG6
relay_outputs UNKNOWN (not published for this family)
remote_on_off UNKNOWN
rs485 UNKNOWN
ve_can False
ve_direct Yes - 'Data communication port: VE.Direct'
wifi UNKNOWN

Protection

over_temperature Yes
over_voltage UNKNOWN
pv_reverse_polarity UNKNOWN - the SmartSolar manual lists only 'Output short circuit, over temperature' for this family, while the BlueSolar datasheet lists 'PV reverse polarity, output short circuit, over-temperature'
short_circuit Output short circuit
under_voltage UNKNOWN

Certifications

standards ['EN/IEC 62109-1', 'UL 1741', 'CSA C22.2 NO.107.1-16']

Warranty & service

summary 5 years - official product page: 'industry-leading 5-year standard warranty'

Documents

datasheet SmartSolar Charge Controllers MPPT 100/30 & 100/50 — datasheet
dimension-drawing Dimension drawing BlueSolar & SmartSolar MPPT 100/30
product-page SmartSolar MPPT 100/30 & 100/50 — official product page
user-manual MPPT solar charger manual SmartSolar MPPT 100/30 & 100/50 — 9. Technical specifications

Additional documented parameters

Recorded verbatim from the source; no schema field exists for these yet.

Charge algorithmMulti-stage adaptive (eight pre-programmed algorithms) or user defined algorithm
ColourBlue (RAL 5012)
Environmental conditionIndoor type 1, unconditioned
Pollution degreePD3

Build a system with this product