Qcells Q.VOLT HYB-G3 10.0 kW 3P
Official manufacturer EU verified Sept. 22, 2026
Unresolved safety-relevant conflict
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Extracted from (page 1)
Identity
| brand | Qcells |
| category | inverters |
| ean | — |
| firmware | {'documented_version': 'UNKNOWN', 'constraints': 'UNKNOWN'} |
| generation | G3 |
| manufacturer | Qcells |
| manufacturer_key | qcells |
| market_version | EU (VDE 4105 / EN 50549-1 / CEI 0-21 / TOR Erzeuger Typ A / PPDS) |
| model | Q.VOLT HYB-G3 10.0 kW 3P |
| model_key | qvolthybg3100kw3p |
| mpn | — |
| product_family | Q.VOLT |
| product_status | active |
| region | EU |
| release_year | — |
| series | Q.VOLT HYB-G3 |
| sku | — |
| variant | 3P |
Electrical
| ac_connection | 3P / N / PE |
| ac_voltage_range | — |
| battery_capacity_range_kwh | — |
| battery_communication | — |
| battery_max_charge_current_a | — |
| battery_max_charge_power_w | — |
| battery_max_discharge_current_a | — |
| battery_max_discharge_power_w | — |
| battery_nominal_battery_voltage_v | — |
| battery_supported |
True
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| battery_type | — |
| battery_voltage_max_v |
480
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| battery_voltage_min_v |
80
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| battery_voltage_range_v | — |
| eps_peak_power | 15.0 kVA for 60 s |
| eps_phase | 3P |
| eps_rated_power_va | 10000.0 |
| eps_switchover_time_ms | < 100 |
| eps_voltage | 400 |
| european_efficiency_pct | 97.0 |
| external_transfer_switch_required | — |
| frequency_range_hz | — |
| inrush_current | — |
| max_ac_active_power_w | — |
| max_ac_current_a | 16.1 |
| max_ac_power_va |
11000
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| max_apparent_power_va | 11000.0 |
| max_backfeed_current_a | — |
| max_charge_current_a |
30
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| max_dc_input_power_w | 15000.0 |
| max_dc_voltage_v | 1000 (nominal operating voltage 630) |
| max_discharge_current_a |
30
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| max_efficiency_pct | 97.6 |
| max_input_current_per_mppt_a | 28 (input A) / 16 (input B) disputed |
| max_output_fault_current_a | 68 (at 5 ms, all types 5 - 15 kW) |
| max_pv_input_voltage_v |
1000
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| max_short_circuit_current_per_mppt_a | 35 (input A) / 20 (input B) disputed |
| mppt_efficiency_pct | 99.9 |
| mppt_topology_notation | "2 / A:2, B:1 as printed" |
| mppt_voltage_max_v |
950
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| mppt_voltage_min_v |
180
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| mppt_voltage_range_v | 180 - 950 |
| night_self_consumption_w | — |
| nominal_ac_voltage | 380 / 400 / 415, 3P / N / PE |
| nominal_dc_voltage_v | — |
| nominal_frequency_hz | 50 / 60 |
| nominal_grid_voltage_v |
380 / 400 / 415 (3P/N/PE)
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| number_of_mppt |
2
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| number_of_pv_inputs |
3
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| official_manual_url |
https://cdn.webshopapp.com/shops/264724/files/380529495/q-cells-installationsanleitung-benutzerhandbuch-qv.pdf
Qcells Installationsanleitung- und Benutzerhandbuch Q.VOLT HYB-G3-3P (6.0/8.0/10.0/12.0/15.0 kW)
|
| parallel_capability | D variant has an integrated DC switch for parallel installation |
| phase_count |
3
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| power_factor_range | 0.8 leading ~ 0.8 lagging |
| rated_ac_power_va |
10000
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| rated_ac_power_w | 10000.0 |
| rated_mppt_voltage_range_v | — |
| startup_voltage_v | 200 |
| strings_per_mppt | A:2, B:1 |
| strings_per_mppt_distribution |
[2, 1]
Q.HOME+ ESS HYB-G3-3P Energy Storage Solution
|
| thd_pct | < 3 (THDi, rated power) |
Physical / mechanical
| ac_terminal | — |
| cooling | Natural convection / Forced convection |
| dc_connector | — |
| depth_mm | 199 |
| dimensions_mm | 503 x 503 x 199 |
| display | LCD, backlight, 20 x 4 character |
| enclosure_material | — |
| height_mm | 503 |
| mounting | — |
| noise_db | < 35 |
| weight_kg | 30 |
| width_mm | 503 |
Installation
| cable_requirements | — |
| commissioning | — |
| installation_angle | — |
| mounting_clearances | — |
| torque | — |
Environment
| ingress_protection | IP65 |
| max_altitude_m | 3000 |
| operating_temperature_c | -35 - +60 (derating at +45) |
| pollution_degree | — |
| protective_class | Class I |
| relative_humidity_pct | 0 - 100 (non-condensing) |
| storage_temperature_c | -40 - +65 |
Interfaces & connectors
| app | — |
| communication | ['E-Meter', 'WLAN', 'Ethernet', 'USB', 'Dry Contact', 'RS485', 'CAN 2.0'] |
| dry_contact | — |
| meter_interface | E-Meter |
| monitoring_portal | — |
| protocols | [] |
Protection
| anti_islanding | Anti-islanding protection |
| arc_fault | — |
| dc_switch | Yes (D variant) |
| insulation_monitoring | Array insulation detection |
| overvoltage_category | III (AC) / II (DC) |
| rcmu | Residual current detection |
| reverse_polarity | — |
| surge_protection_ac | Integrated SPD, AC (Type II) |
| surge_protection_dc | Integrated SPD, DC (Type II) |
Certifications
| standards | ['EN 62109-1', 'EN 62109-2', 'EN 61000-6-1 2007', 'EN 61000-6-2 2005', 'EN 61000-6-3', 'EN 61000-6-4', 'EN 61000-3-2', 'VDE 4105', 'EN 50549-1', 'CEI 0-21', 'TOR Erzeuger Typ A', 'PPDS'] |
Warranty & service
| conditions | — |
| extension_options | — |
| standard_years | 10 |
Documents
Recorded conflicts
electrical.max_short_circuit_current_per_mppt_a Review required
35 (input A) / 20 (input B) — stored value
[35, 20] — Max. input current (short circuit current) (input A / input B) 28 (35) / 16 (20) (axis: input A, input B)
Detected during import v1-freeze-2026-09-batch09
electrical.max_input_current_per_mppt_a Review required
28 (input A) / 16 (input B) — stored value
[28, 16] — Max. input current (short circuit current) (input A / input B) 28 (35) / 16 (20) (axis: input A, input B)
Detected during import v1-freeze-2026-09-batch09
electrical.startup_voltage_v Resolved — accepted incoming value
200 (start operating voltage) — stored value
200 — MPP voltage range (start operating voltage) 180 - 950 (200)
Detected during import v1-freeze-2026-09-batch09
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| Battery charge / discharge efficiency [%] | 97.0 / 97.0 |
| Max. apparent AC power (INPUT - AC) [kVA] | 20 |
| Max. current (INPUT - AC) [A] | 32.0 |
| Max. input current (short circuit current) (input A / input B) [A] | 28 (35) / 16 (20) |
| Max. input current (short circuit) | 16(20)/16(20) ... 28(35)/16(20) |
| No. of MPP trackers / strings per MPP tracker | 2 / A:1, B:1 ... 2 / A:2, B:1 |
| battery.communication | UNKNOWN |
| battery.max_charge_current_a | UNKNOWN |
| battery.max_charge_power_w | UNKNOWN |
| battery.max_discharge_current_a | UNKNOWN |
| battery.max_discharge_power_w | UNKNOWN |
| battery.nominal_battery_voltage_v | UNKNOWN |
| identity.variant_as_researched | 3P; -D variant with integrated DC switch for parallel installation is offered but has no separate specification column |
| withheld:pv.mppt_topology_notation | "2 / A:2, B:1 as printed" |