Schneider Electric XW Pro 8548 (230 V)
Official manufacturer EU verified Sept. 22, 2026
Unresolved safety-relevant conflict
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Two sources give different figures for a value on this product and nobody has resolved it. The specifications below are shown as recorded, but this product must not be treated as verified for engineering purposes until the conflict is closed.
Direct fetch from solar.se.com
Identity
| category | inverters |
| ean | — |
| firmware | {'documented_version': 'UNKNOWN', 'constraints': 'UNKNOWN'} |
| generation | — |
| manufacturer | Schneider Electric |
| market_version | IEC / 230 V (EMEA) |
| model | XW Pro 8548 (230 V) |
| mpn | 865-8548-55 |
| product_family | Conext XW Pro |
| product_status | discontinued |
| region | EU |
| release_year | — |
| series | XW Pro |
| sku | 865-8548-55 |
Electrical
| ac_connection | single phase; 3-phase stacking supported |
| ac_voltage_range | — |
| battery_capacity_range_kwh | — |
| battery_communication | — |
| battery_max_charge_current_a | — |
| battery_max_charge_power_w | — |
| battery_max_discharge_current_a | 180 |
| battery_max_discharge_power_w | — |
| battery_nominal_battery_voltage_v | — |
| battery_type | — |
| battery_voltage_range_v | — |
| eps_peak_power | 8.5 kW for 30 minutes; 12 kW for 1 minute |
| eps_phase | — |
| eps_rated_power_va | — |
| eps_switchover_time_ms | — |
| eps_voltage | — |
| euro_efficiency_pct | 97.0 |
| european_efficiency_pct | — |
| external_transfer_switch_required | — |
| frequency_range_hz | — |
| inrush_current | — |
| max_ac_active_power_w | 6.8 kW continuous; 8.5 kW for 30 minutes; 12 kW for 1 minute |
| max_ac_current_a | 53 |
| max_apparent_power_va | — |
| max_backfeed_current_a | — |
| max_dc_input_power_w | — |
| max_dc_voltage_v | — |
| max_efficiency_pct | 95.0 |
| max_input_current_per_mppt_a | — |
| max_output_fault_current_a | — |
| max_short_circuit_current_per_mppt_a | — |
| mppt_count | 2 |
| mppt_efficiency_pct | — |
| mppt_voltage_range_max_v | 550.0 |
| mppt_voltage_range_min_v | 80.0 |
| mppt_voltage_range_v | — |
| night_self_consumption_w | — |
| nominal_ac_voltage | 230 V output, single phase and 3-phase stacking |
| nominal_ac_voltage_v | 230.0 |
| nominal_dc_voltage_v | 48 |
| nominal_frequency_hz | — |
| number_of_mppt | — |
| official_manual_url |
https://solar.se.com/eu/wp-content/uploads/sites/4/2021/08/XW-Pro-IEC-Install-Guide_990-91403.pdf
Conext XW Pro Installation Guide (IEC), document 990-91403D-01, June 2023
|
| overload_rating | 1.75x high overload power rating for backup power operation |
| parallel_capability | single phase and 3-phase stacking |
| phase_count | 1 |
| power_factor_range | — |
| rated_ac_power_w | 6800 |
| rated_mppt_voltage_range_v | — |
| startup_voltage_v | — |
| strings_per_mppt | — |
| thd_pct | — |
Physical / mechanical
| ac_terminal | — |
| cooling | — |
| dc_connector | — |
| depth_mm | — |
| dimensions_mm | — |
| display | — |
| enclosure_material | — |
| height_mm | — |
| mounting | — |
| noise_db | — |
| weight_kg | — |
| width_mm | — |
Installation
| cable_requirements | — |
| commissioning | — |
| installation_angle | — |
| mounting_clearances | — |
| torque | — |
Environment
| ingress_protection | IP 20 |
| ip_rating | IP65 |
| max_altitude_m | — |
| operating_temperature_c | -25 to +70 |
| operating_temperature_max_c | 60.0 |
| operating_temperature_min_c | -25.0 |
| pollution_degree | — |
| protective_class | — |
| relative_humidity_pct | — |
| storage_temperature_c | — |
Interfaces & connectors
| app | — |
| communication | [] |
| dry_contact | — |
| meter_interface | — |
| monitoring_portal | — |
| protocols | [] |
Protection
| anti_islanding | — |
| arc_fault | — |
| dc_switch | — |
| insulation_monitoring | — |
| overvoltage_category | — |
| rcmu | — |
| reverse_polarity | — |
| surge_protection_ac | — |
| surge_protection_dc | — |
Warranty & service
| conditions | — |
| extension_options | — |
| standard_years | — |
| warranty_years | 10 |
Documents
installation_manual
Conext XW Pro Installation Guide (IEC), document 990-91403D-01, June 2023
installation_manual
Conext XW Pro Operation Guide (IEC), document 990-91402C
Recorded conflicts
rated_pv_input_voltage_v Review required
48 — value currently stored in ANMA
None — https://solar.se.com/eu/wp-content/uploads/sites/4/2021/08/DS20210129-Conext-XW-Pro-IEC.pdf
document-revision
Additional documented parameters
Recorded verbatim from the source; no schema field exists for these yet.
| AC output Continuous power at 25°C / Overload (30 min / 60 s) | 6800 W / 8500 W / 12000 W |
| DC input Maximum input current | 180 A |
| battery.communication | UNKNOWN |
| battery.max_charge_current_a | UNKNOWN |
| battery.max_charge_power_w | UNKNOWN |
| battery.max_discharge_current_a | UNKNOWN |
| battery.max_discharge_power_w | UNKNOWN |
| battery.nominal_battery_voltage_v | UNKNOWN |
| rejected_document_entry | {"type": "datasheet", "title": "XW Pro IEC Datasheet", "url": "UNKNOWN", "revision": "UNKNOWN", "language": "en", "region": "EU", "publication_date": "UNKNOWN", "is_official": true, "located_not_fetched": true} |
| solar.se.com product page marketing copy | 'The XW Pro solar hybrid inverter is the heart of your home power system' |